1998 CMI RS650 Cold Planer (IronPlanet Item #233787)

SOLD!

Winning Bid: US $35,000

• Sold on: 11/5/09
• # of Bids: 4 View Bid History
• Buyer From: Mexico

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here

Features:	Open operator station, Cat 6 cylinder engine, hydrostatic drive, 750/65R25 and 28L26 tires. This item subject to storage fees of $100 per day if not removed after 30 business days following the close of auction. Item must be removed before end of 60 days after close of auction to avoid abandonment.

Meter Reading:	4,447 Hours
Serial Number:	543191
Location:	Maine, United States Zip/Postal Code: 04092 (Portland area)
	Request shipping quote or additional assistance with transportation More Shipping Details

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Protected by IronClad Assurance®

General Appearance

Serial Number / VIN		543191
CE Certification Label		No
Paint		The paint is faded with scratches and chips.
Sheet metal (fiberglass) condition		The sheet metal is dented and scraped. There is rust in the paint loss areas. The left side door going up the ladder does not open.

Serial Number / VIN

Control Station

Steps/Ladders		The left side steps are bent.
Hand Rails		The right side hand rails are bent.
Seats/Armrests		Torn cover; Inoperable slide or adjustment
Seat Belts		Dirty
Horn		Missing
Disconnect Control
Hydraulic Controls		Damaged boots
Steering Controls
Exterior Lights Functional		Some Inoperable
Hour Meter/Odometer		Functional; 4,447 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)		The main components functioned during a limited check.

Hour Meter/Odometer

Engine

Engine Make and Model		Cat 6 cylinder engine
Fuel Type		Diesel
Emission Control Label		None found
Blow by @ idle (subjective observation)		Minimal
Starter
Turbo or Blower		Operational; Rusty; Exhaust leak
Injector Pump		Operational
Exhaust System		The muffler is warped, and the exhaust pipe is rusty.
Radiator		There are debris on the bottom of the radiator.
Head Gasket Leaks		None seen
Oil Leaks		The engine is covered with dust, dirt, and oily residue. There is seepage on the rear side of the engine.
Fuel Leaks		None seen
Cooling System Leaks		None seen
Limited Function Check		The engine started and ran during a limited check. See oil report.

Blow by @ idle (subjective observation)

Chassis - Cold Planner

Drive/propel motors		Oil residue
Final Drives
Limited Function Check		The drivetrain functioned during a limited low speed check without a load.
Rotor Drive Clutch
Rotor Drive Pulleys
Rotor Drive Belt		Cuts
Belt Tensioner		Cylinder Jack
Rotor Final Drive		Seepage
Rotor Shaft Bearings		Normal
Main Frame		Multiple weld repairs
Rotor Mandrel		See Photos
Cutting Bits		Damaged; Worn
Roller Frame Legs		Weld repair; Some of the welds are cracked.
Rotor Compartment Doors		Dents; Hinges damaged; Weld repairs
Limited Function Check (Cold Planner)		The components that could be checked functioned with wear as noted.
Tire Size (4)		750/65 R25; Brands: Michelin and Goodyear; Right Rear tire size: 28L26
Tire Condition		Cuts
Tread Depth (4 tires)		RF 36 mm; LF 34 mm; RR 55 mm; LR 38 mm
Wheel Condition		Weld repair
Wheel Studs
Limited Function Check		The main chassis components functioned during a limited check.

Chassis - Cold Planner #1

Hydraulics

Pumps (Hydraulics)		Seepage
Valves		Seepage
Hydraulic Tank		Low oil level; Sight glass seepage
Hoses (Hydraulics)		Worn; Weathered
Cylinders		Seepage; The right rear lift cylinder leaks.
Cylinder Pins and Bushings		Wear consistent with hours and age
Limited Function Check		The hydraulic system performed with wear and / or leaks as noted. See oil report.

Hydraulics #1

Oil Sample Analysis	Engine	Hydraulic
date of analysis	Oct 20, 2009	Oct 20, 2009
Silicon	0 PPM	12 PPM
Lead	0 PPM	0 PPM
Tin	0 PPM	0 PPM
Copper	1 PPM	0 PPM
Aluminum	1 PPM	0 PPM
Silver	0 PPM	0 PPM
Nickel	0.1 PPM	0 PPM
Chromium	0.1 PPM	0 PPM
Iron	7 PPM	1 PPM
Glycol	NEG	N/A
Water	NEG	NEG
Fuel	<5%	N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Request shipping quote or additional assistance with transportation

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Maine, United States
Zip/Postal Code: 04092 (Portland area)
The purchase of this item is subject to Maine sales tax unless certain conditions are met.
Hours: 8 - 4 Mon - Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

1998 CMI RS650 Cold Planer (#233787)