• |
  • 888-433-5426
  • |
  • English
 Home Page / Construction / Caterpillar 966D Wheel Loader
 

Caterpillar 966D Wheel Loader (#233786)

[Email to a Friend] [View all items in this Public Auction] 		Print Equipment Brochure  Print Equipment Brochure
Financing Available for this Item

SOLD!
Winning Bid: US $58,000  

• Sold on: 11/5/09
• # of Bids: 35   View Bid History
• Buyer From: Illinois

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab with A/C and heater components, Cat 3306 engine, powershift, 23.5R25 tires, 120" bucket. This item subject to storage fees of $100 per day if not removed after 30 business days following the close of auction. Item must be removed before end of 60 days after close of auction to avoid abandonment.
Meter Reading: 18,063 Hours
Serial Number: 99Y03576
Location: Maine, United States
Zip/Postal Code: 04092
(Portland area) 		 
  Request shipping quote or additional assistance with transportation
More Shipping Details 		 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
Protected by IronClad Assurance®
 
General Appearance
Serial Number / VIN 99Y03576
CE Certification Label No
Paint The paint is faded with scratches and chips.
Sheet metal (fiberglass) condition The sheet metal is dented, scraped, and damaged with significant rust and corrosion in the paint loss areas.
Serial Number / VIN
 
Control Station
Steps/Ladders The steps are bent.
Hand Rails The right side hand rails are bent.
Mirrors
Glass The glass is dirty.
Seats/Armrests
Seat Belts
Horn Functional
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional Yes; The right front light is inoperable.
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional; 18,063 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Ambient temperature too cold to check; The compressor belt is missing.
Heater Functional
Limited Function Check (cs) The main components functioned during a limited check.
Hour Meter/Odometer
 
Engine
Engine Make and Model Cat 3306 engine; Serial #: 08Z23508
Fuel Type Diesel
Emission Control Label None found
Block Heater Yes
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Significant rust
Injector Pump Operational; Seepage; Throttle shaft wear
Exhaust System
Radiator Minor plugging of fins
Head Gasket Leaks None seen
Oil Leaks There is residue on the front and side of the engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter Feels normal
Differential (front)
Differential (rear) Leak; There is oil residue around the input shaft.
Final Drives
Limited Function Check The drivetrain functioned during a limited check without a load.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves Seepage
Hydraulic Tank
Hoses (Hydraulics) Worn; Weathered; Steel braid exposed
Auxiliary Hydraulic Plumbing Yes
Cylinders
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Heavy Wear; Wear consistent with hours and age
Articulating Center Pins Wear consistent with hours and age
Steering Wheel Play Visible slack
Brake Type Air over hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Held on slope
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Frame Condition Extra brackets have been welded to the frame.
Tire Size (4) 23.5R25 Tires; Brand: Michelin
Tire Condition Cuts; Gouges; Low air
Tread Depth (4 tires) RF 18 mm; LF 10 mm; RR 23 mm; LR 23 mm
Wheel Condition The wheels are rusty, and the front wheels are covered in asphalt splatter.
Wheel Studs, Nuts, Lugs
Lift Arm Condition The lift arm is covered in asphalt splatter.
Chassis to Arm Pins Wear consistent with hours and age
Tilt Linkage Pins and Bushings Wear consistent with hours and age
Bucket to Arms Pins Wear consistent with hours and age
Limited Function Check (rt machines) The main components were operational with wear and / or damage as noted.
Chassis #1
 
Specialty
Loader Bucket Condition Width: 120"; There is asphalt splatter on the back side of the bucket. The bucket has hard faced welds on the side and bottom wear guides. The front edge of the bucket is worn into a scalloped pattern.
Loader Bucket Cutting Edge Reversible-Not turned
(Other) There are brackets welded on the right side of the machine, and there are two sets of hydraulic controls.
Specialty #1
Oil Sample Analysis Engine Hydraulic
date of analysis Oct 20, 2009 Oct 20, 2009
Silicon 5 PPM 8 PPM
Lead 0 PPM 0 PPM
Tin 1 PPM 2 PPM
Copper 1 PPM 7 PPM
Aluminum 0 PPM 0 PPM
Silver 0 PPM 0 PPM
Nickel 0.4 PPM 0 PPM
Chromium 0.4 PPM 0 PPM
Iron 18 PPM 5 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Maine, United States
  • Zip/Postal Code: 04092 (Portland area)
  • The purchase of this item is subject to Maine sales tax unless certain conditions are met.
  • Hours: 8 - 4 Mon - Fri
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...