Access panel handle is broken, minor dents, rust in paint loss areas
Serial Number / VIN
Control Station
Steps/Ladders
Hand Rails
Mirrors
Seats/Armrests
Seat Belts
Horn
Functional
Control Lock Lever
Disconnect Control
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional
Yes
Engine Warning Lights
Functional
Travel Alarm
Functional
Gauges
Functional
Hour Meter/Odometer
Functional 4,669 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Functional
Limited Function Check (cs)
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Engine Make and Model
Cat 3126 engine Serial #: BMA03428
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Radiator
Minor plugging of fins
Head Gasket Leaks
None seen
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Travel Speeds
Variable single
Steering Clutches
Steering Brakes
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational during a limited check without a load.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinders
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Roller Frames
Belly pans
Pivot Shafts
Limited Function Check (loader)
The main components were operational with minor wear.
Push arm/C-frame condition
Push Arm Trunnions
Blade Trunnions/bushings
Blade Lift Linkage Pins and Bushings
Limited Function Check (dozer)
The main components were operational with minor wear.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)
88"
Track Tensioners
See photos
Shoe Width
20"
Grouser height
45-51mm
Track link wear
See photos
Pins and Bushings Turned?
No
Pins and bushing wear
See photos
Carrier rollers wear
See photos
Track rollers wear
See photos
Front idler wear
See photos
Rear idler wear
See photos
Sprockets
See photos
Undercarriage #1
Specialty
Blade Condition
120" Blade width
Blade Cutting Edge Condition
Loader Bucket Cutting Edge
Winch
Allied Systems; Model: W5C; Serial #: AW15CP3R1472C77
Drawbar
No pin
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Oct 19, 2009
Oct 19, 2009
Silicon
7 PPM
17 PPM
Lead
0 PPM
0 PPM
Tin
0 PPM
0 PPM
Copper
3 PPM
6 PPM
Aluminum
1 PPM
7 PPM
Silver
0 PPM
0.1 PPM
Nickel
0.3 PPM
0.2 PPM
Chromium
0.7 PPM
0.6 PPM
Iron
13 PPM
6 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
888-433-5426
