• |
  • 888-433-5426
  • |
  • English
 Home Page / Make="Aisle Master" / Caterpillar SR4-B 205 KW Generator
 

Caterpillar SR4-B 205 KW Generator (#233517)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $14,500  

 Sold on: 11/5/09
 # of Bids: 26
 Buyer From: Venezuela

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Tandem axle chassis w/ pintle hitch, Cat 3306 engine, LT235/85R16 tires, Cat SR-4B generator, 3 phase, 480 volt, 205 KW, 60 HZ, 256 KVA, Please see Repair History link below for additional information.
Meter Reading: 10,024 Hours
Serial Number: 6388955B
Location: California, United States
Zip/Postal Code: 93514
(Inyo County)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN 6DG00707 / 638895SB
CE Certification Label No
Paint The paint is scratched chipped and faded.
Sheet metal (fiberglass) condition Minor dents/scrapes with rust in paint loss areas, Heat marks
Serial Number / VIN
 
Control Station
Hour Meter Reading Reading: 10,024; Functional - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Gauges Functional
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.; PSI: 80
Engine Warning Lights Functional
Limited Function Check (cs) The components that were checked functioned except as noted
Hour Meter Reading
 
Engine
Engine Make and Model Cat 3306 engine Serial #: 85Z12917
Fuel Type Diesel
Emission Control Label None found
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
 
Generator
Voltage Each Battery 28V
Disconnect Switch Functions normally
Cables and Connections
Emergency Shut Off Switch
Receptacles Not functionally checked, weld repairs
Limited Function Check (Power Unit) The Power Unit responded well with no unusual noises.
Generator #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Axle Condition
Trailer Brakes Surge brakes
Brake Lines/Hoses
Limited Function Check (Brakes) The brake system functioned, stopping and holding the machine.
Tire Size LT235/85 R16; Brand: Goodyear
Tread Depth RF 10 mm; LF 9 mm; RR 10 mm; LR 9 mm
Wheel Condition
Wheel Studs
Springs/Hangers Condition
Tongue/ Hitch Condition
Power Receptacle Functional Yes
Lights/wiring Condition
Marker Lights Functional Yes
Brake Lights Functional Yes
Turn Signals Functional Yes
License Plate Light Functional Yes
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Overall Length and Width 219"x 88 "
Chassis #1
 
Specialty
Generator Cat SR-4B; 3 phase 256 KVA 205 KW 60HZ 480 volt Not functionally checked to power 110 volt; With unit running PH A-B 491 Volts 60.3 HZ
Specialty #1
Oil Sample Analysis Engine
date of analysis Oct 16, 2009
Silicon 47 PPM
Lead 2 PPM
Tin 1 PPM
Copper 2 PPM
Aluminum 3 PPM
Silver 0 PPM
Nickel 0.6 PPM
Chromium 8.3 PPM
Iron 38 PPM
Glycol NEG
Water NEG
Fuel <5%

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: California, United States
  • Zip/Postal Code: 93514 (Inyo County)
  • The purchase of this item is subject to California sales tax unless certain conditions are met.
  • Hours: 9:00 - 3:00 Mon - Fri
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...