Minor dents; scrapes; brackets mounted to the front; rust in paint loss areas
General Appearance #1
Control Station
Steps/Ladders
Hand Rails
Mirrors
Glass
Seats/Armrests
Seat Belts
Horn
Functional
Control Lock Lever
Transmission Disconnect Control
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises
Exterior Lights Operational
Yes
Engine Warning Lights
Functional
Travel Alarm
Inoperable
Gauges
Functional; missing knob; blank holes in panel
Hour Meter/Odometer
Functional; 7,769 hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Functional; soldered line
Heater
Functional; bent fins; missing knob
Limited Function Check
The components that were checked functioned except as noted. A pipe clamp is around the speaker.
Hour Meter/Odometer
Engine
Make and Model
Deere 6466AT-12
Fuel Type
Diesel
Emission Control Label
None found
Block Heater
Yes; not functionally checked
Blow by @ idle (subjective observation)
Significant
Starter
Turbo or Blower
Operational
Injector Pump
Operational; wet residue
Exhaust System
Radiator
Head Gasket Leaks
None seen
Oil Leaks
None seen; residue
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader)
Powershift; 8F/4R speeds
Transmission
Residue
Torque Converter
Functional
Rear Tandems (Chain Drives)
Wet residue
Final Drives
Residue
Limited Function Check
The drivetrain functioned during a limited check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Wet residue
Hydraulic Motors
Seepage, residue
Valves
Hydraulic Tank
Hoses (Hydraulics)
Weathered; torn cover
Cylinder(s)
Multiple leaks; residue
Cylinder Pins and Bushings
Damaged seal; worn
Limited Function Check
The hydraulic system was operational with leaks, damage, and wear during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion
Dry; shims remaining; residue
Circle Frame and Brackets
Circle Wear Strips
Worn; dry
Circle Support Brackets
Circle Gear Box
Circle Gear
Worn pinion; residue
Mold Board Slide Wear Strips
Worn
Articulating Center Pins Wear
Visible slack
Front Axle Oscillating Pin Wear
Steering Linkage
Residue
Steering Wheel Play
Minimal
Wheel Tilt Linkage
Limited Function Check (grader)
The main chassis components functioned with wear during a limited check.
Brake Type (Motorgrader)
Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Unable to test w/o slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction.
The exact item location will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-5, Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Must call 2 days in advance to make pickup arrangements
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before November 10.
This item is subject to 9% Colorado sales tax unless proof of exemption or declaration of Common Carrier shipment to another state is presented during item Checkout. (Read more)
Buyer must pay a transaction fee (see Buyer fees).
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee Penalty.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and forward to Bryan
Grittner or fax the application to (469) 519-4394.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Pinnacle Capital
Full Spectrum Financing for IronPlanet Auctions
IronPlanet has been offering financing for your purchases through a
partnership with Pinnacle Capital since 2002. Pinnacle knows what it takes to
get auction deals done fast and has facilitated several millions of dollars in
online purchases. Get a pre-approved line of credit set-up before you place a
bid to confirm your buying power. Click here to learn more about Pinnacle's financing products.
To qualify, complete Pinnacle's online
application. Once approved, they'll take care of the rest. Please contact
Matt Perini at 800-566-1993 or by
email to discuss the transaction further.
Powertrain Coverage. Covers major drive train components- engine, torque hubs, transmission & front
and rear axles - and more
Available in North America. May be purchased by residents of U.S. and Mexico only, for equipment operated
within U.S., Mexico or Canada.
OEM parts and service. All repairs are made by an OEM authorized repair facility with genuine OEM replacement
parts installed by OEM trained technicians.
888-433-5426
