Komatsu D45A Track Dozer w/Ripper (IronPlanet Item #233330)

SOLD!

Winning Bid: US $7,500

• Sold on: 11/5/09
• # of Bids: 11 View Bid History
• Buyer From: Oklahoma

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here

Features:	Open operator station, Komatsu S4DIO5-1 engine, powershift, 18" track shoes, 95" blade, ripper

Meter Reading:	See Report
Serial Number:	1660
Location:	Colorado, United States Zip/Postal Code: 80011 (Adams County)
	Request shipping quote or additional assistance with transportation More Shipping Details
You may also be interested in these other items.

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Protected by IronClad Assurance®

General Appearance

Serial Number / VIN		1660
CE Certification Label		No
Paint		Faded; scratches
Sheet metal (fiberglass) condition		Minor dents, scrapes and surface rust in the paint loss areas.

Serial Number / VIN

Control Station

Hand Rails		Bent right side
Seats/Armrests
Control Lock Lever
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure		Within range
Exterior Lights Functional		N/A; No
Travel Alarm		Inoperable
Gauges		Functional
Hour Meter/Odometer		Functional; 3,367 hours; Engine hours: 4126 - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)		The components that were checked functioned except as noted.

Hour Meter/Odometer

Engine

Engine Make and Model		Komatsu S4DIO5-1; serial# 25501
Fuel Type		Diesel
Emission Control Label		None found
Blow by @ idle (subjective observation)		Minimal
Starter
Turbo or Blower		Operational
Injector Pump		Operational
Exhaust System
Radiator		Minor plugging of fins
Head Gasket Leaks		None seen
Oil Leaks		None seen
Fuel Leaks		There is a leak in the fuel line.
Cooling System Leaks		None seen
Limited Function Check		The engine started and ran with leaks during a limited check with out a load. The engine required either to start. See oil report.

Blow by @ idle (subjective observation)

Drivetrain

Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Travel Speeds		How many speeds?: 3
Steering Clutches		Slips; The inspector noted you have to pull the levers back far to operate the machine.
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)		The drivetrain was operational during a limited check without a load. See oil report.

Drivetrain #1

Hydraulics

Pumps (Hydraulics)
Hydraulic Tank		Low oil level
Hoses (Hydraulics)		Worn
Cylinders		Leak
Cylinder Pins and Bushings		Wear consistent with hours and age
Limited Function Check		The hydraulic system performed with wear and leaks as noted.

Hydraulics #1

Chassis

IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Roller Frames
Belly pans
Pivot Shafts
Equalizer Bar Pivot Wear
Limited Function Check (loader)		The main loader components functioned with wear and / or damage as noted.
Push arm/C-frame condition		Visible movement
Push Arm Trunnions		Visible movement
Tilt/angle Linkage Pins and Bushings		Wear consistent with hours and age
Blade Trunnions/bushings		Shims remaining
Blade Lift Linkage Pins and Bushings		Wear consistent with hours and age
Limited Function Check (dozer)		The main dozer components functioned with wear.

Chassis #1

Undercarriage

Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)		80"
Track Tensioners		See photos
Shoe Width		18"
Grouser height		30 mm
Track link wear		See photos
Pins and Bushings Turned?		No
Track rollers wear		See photos
Sprockets		See photos
Limited Function Check (Undercarriage)		The main components functioned with minor to moderate wear.

Undercarriage #1

Specialty

Blade Condition		95"
Blade Cutting Edge Condition		Reversible-Not turned
Ripper

Specialty #1

Oil Sample Analysis	Engine	Transmission
date of analysis	Oct 16, 2009	Oct 16, 2009
Silicon	8 PPM	9 PPM
Lead	5 PPM	110 PPM
Tin	4 PPM	2 PPM
Copper	5 PPM	131 PPM
Aluminum	3 PPM	0 PPM
Silver	0 PPM	0.1 PPM
Nickel	0.8 PPM	0.5 PPM
Chromium	0.7 PPM	0.1 PPM
Iron	22 PPM	27 PPM
Glycol	NEG	N/A
Water	NEG	NEG
Fuel	<5%	N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Request shipping quote or additional assistance with transportation

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Colorado, United States
Zip/Postal Code: 80011 (Adams County)
The purchase of this item is subject to Colorado sales tax unless certain conditions are met.
Hours: 8-5, Mon-Fri
Call at least one day in advance to schedule pickup.
Loading Dock Available.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Must call 2 days in advance to make pickup arrangements

We Suggest You Also See...

Komatsu D45A Track Dozer w/Ripper (#233330)