2006 Caterpillar 930G Wheel Loader (IronPlanet Item #233328)

SOLD!

Winning Bid: US $69,000

• Sold on: 11/5/09
• # of Bids: 63 View Bid History
• Buyer From: Ontario

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here

Features:	Enclosed cab w/heater and A/C components, Cat 3056E DIT engine, powershift transmission-4F/3R, 100" bucket.

Meter Reading:	1,922 Hours
Serial Number:	TWR01999
Location:	Colorado, United States Zip/Postal Code: 80011 (Adams County)
	Request shipping quote or additional assistance with transportation More Shipping Details

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Protected by IronClad Assurance®

General Appearance

Serial Number / VIN		TWR01999
Paint		Scratches; Chips
Sheet metal (fiberglass) condition		There is rust in paint loss area.

Serial Number / VIN

Control Station

Steps/Ladders
Hand Rails
Mirrors
Glass
Seats/Armrests
Seat Belts
Horn		Functional
Control Lock Lever
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure		The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional		Yes
Engine Warning Lights		Functional
Travel Alarm		Functional
Gauges		Functional
Hour Meter/Odometer		Functional; 1922 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner		Ambient temperature too cold to check
Heater		Functional
Limited Function Check (cs)		The components that were checked functioned except as noted.

Hour Meter/Odometer

Engine

Engine Make and Model		Cat 3056E DIT engine
Fuel Type		Diesel
Emission Control Label		US EPA certification label
Blow by @ idle (subjective observation)		Minimal
Starter
Turbo or Blower		Operational
Injector Pump		Operational
Exhaust System
Radiator
Head Gasket Leaks		None seen
Oil Leaks		None seen
Fuel Leaks		None seen
Cooling System Leaks		None seen
Limited Function Check		The engine started and ran during a limited check. See oil report.

Blow by @ idle (subjective observation)

Drivetrain

Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission		Powershift transmission-4F/3R
Torque Converter		Functional
Differential (front)
Differential (rear)
Final Drives
Limited Function Check		The drivetrain functioned during a limited check without a load. See oil report.

Drivetrain #1

Hydraulics

Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinders
Cylinder Pins and Bushings
Limited Function Check		The hydraulic system was operational during a limited check without a load.

Hydraulics #1

Chassis

IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Articulating Center Pins
Brake Type		Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake		Unable to test w/slope
Limited Function Check (Brakes)		The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size (4)		20.5R25 tires; Brand: Yokohama
Tire Condition		Cuts
Tread Depth (4 tires)		RF 23 mm; LF 25 mm; RR 22 mm; LR 21 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Tilt Linkage Pins and Bushings
Bucket to Arms Pins
Limited Function Check (rt machines)		The main chassis components functioned during a limited check.

Chassis #1

Specialty

Loader Bucket Condition		100" General purpose loader bucket
Loader Bucket Cutting Edge		Reversible-Not turned

Specialty #1

Oil Sample Analysis	Engine	Transmission
date of analysis	Oct 22, 2009	Oct 22, 2009
Silicon	7 PPM	10 PPM
Lead	1 PPM	9 PPM
Tin	1 PPM	2 PPM
Copper	1 PPM	8 PPM
Aluminum	4 PPM	3 PPM
Silver	0 PPM	0.3 PPM
Nickel	0.2 PPM	0.2 PPM
Chromium	0.1 PPM	0.3 PPM
Iron	5 PPM	12 PPM
Glycol	NEG	N/A
Water	NEG	NEG
Fuel	<5%	N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Request shipping quote or additional assistance with transportation

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Colorado, United States
Zip/Postal Code: 80011 (Adams County)
The purchase of this item is subject to Colorado sales tax unless certain conditions are met.
Hours: 8-5, Mon-Fri
Call at least one day in advance to schedule pickup.
Loading Dock Available.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Must call 2 days in advance to make pickup arrangements

2006 Caterpillar 930G Wheel Loader (#233328)