Dents, damage and surface rust in paint loss areas. Weld repairs throughout the machine.
Serial Number / VIN
Control Station
Steps/Ladders
The rear steps on both sides are aftermarket. The steps have been weld repaired.
Hand Rails
The left side hand rails are bent.
Mirrors
Glass
The upper front glass is broken, and the lower front glass is missing. The right side glass has been replaced with plexiglas, and the upper glass to the top of the cab is cracked. The windshield washer fluid bottle is broken.
Seats/Armrests
The armrest covers are cracked.
Seat Belts
Horn
Functional
Safety lock out/stop
Hydraulic Controls
Steering Controls
Powertrain Controls
The inspector noted the powertrain controls might need to be adjusted.
Oil Pressure
Green PSI
Exterior Lights Functional
Yes
Engine Warning Lights
Inoperable
Travel Alarm
Inoperable; The travel alarm connect button is missing.
Gauges
Functional
Hour Meter/Odometer
Functional; 11,307; Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The components that were checked functioned except as noted.; Both of the travel valves are leaking at the seal.
Hand Rails
Engine
Engine Make and Model
Engine make: Cat; 3406 engine; Serial #: 70V17633
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Radiator
Head Gasket Leaks
None seen
Oil Leaks
There is oil residue on the valve cover and the side of the engine. There is seepage on the gasket on the pan between the front and rear areas.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine was operational with leaks. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
The drive motors are leaking at the left test port.
Limited Function Check
The drivetrain was operational with leaks during a limited low speed check without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
The pump drive gear box is leaking at the cover seal.
Hydraulic Motors
The left drive motor is leaking at the test port.
Valves
The main valve o-rings show heavy damage, and the inspector noted they may need to be replaced. The valves are leaking.
Hydraulic Tank
Low oil level
Hoses (Hydraulics)
Weathered
Cylinders
There is seepage around the head and stick cylinder seals.
Cylinder Pins and Bushings
Wear consistent with hours and age; Limited check
Limited Function Check
The machine is not assembled, and many hydraulic components could not be functionally checked. See oil report.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
The boom is cracked and weld repaired.
Stick Condition
Boom Base Pin and Bushings
Wear consistent with hours and age
Pin and Bushings Boom to Stick
Not checked
Pin and Bushings Stick to Bucket
Not checked
Stick Length
175" Stick Length
Turn-table Bearing
Performs within tolerance expected for age and hours
Bottom Covers
Swing Motor
Roller Frames
Rusty
Limited Function Check (Backhoe)
Not all components could be functionally checked due to disassembly.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)
158" Overall width
Track Tensioners
See photos
Shoe Width
30" shoe width
Grouser height
42-43 mm
Track link wear
See photos
Pins and Bushings Turned?
No
Pins and bushing wear
See photos
Carrier rollers wear
See photos
Track rollers wear
See photos; Two of the right side roller bearings are damaged, and three of the left side roller bearings are damaged.
Sprockets
See photos
Undercarriage #1
Specialty
Attachment (Other)
Removable 10,000 lb counterweight
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Oct 12, 2009
Oct 12, 2009
Silicon
6 PPM
0 PPM
Lead
0 PPM
0 PPM
Tin
1 PPM
2 PPM
Copper
2 PPM
1 PPM
Aluminum
1 PPM
0 PPM
Silver
0 PPM
0 PPM
Nickel
0.7 PPM
0 PPM
Chromium
0.2 PPM
0.5 PPM
Iron
2 PPM
2 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
>5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: California, United States
Zip/Postal Code: 95304
(Stockton-Lodi area)
The purchase of this item is subject to California sales tax unless certain conditions are met.
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
888-433-5426
