• |
  • 888-433-5426
  • |
  • English
 Home Page / Construction / 2005 Caterpillar CB534D Vibratory Compactor - Double Drum Asphalt
 

2005 Caterpillar CB534D Vibratory Compactor - Double Drum Asphalt (#232620)

[Email to a Friend] [View all items in this Public Auction]

SOLD!
Winning Bid: US $42,000  

 Sold on: 11/5/09
 # of Bids: 21   View Bid History
 Buyer From: Nevada

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Open operator station, Cat 3054C engine, hydrostatic, vibratory, 67" smooth drum, water system
Meter Reading: 3,042 Hours
Serial Number: FGH00481
Location: Washington, United States
Zip/Postal Code: 99301
(Richland-Kennewick-Pasco area)
 
  Request shipping quote or additional assistance with transportation
More Shipping Details
 
You may also be interested in these other items.
Inspection Report  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of equipment
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Serial Number / VIN FGH00481
CE Certification Label No
Paint
Sheet metal (fiberglass) condition Minor dents, scrapes and surface rust in the paint loss areas.
Serial Number / VIN
 
Control Station
Steps/Ladders
Hand Rails
Seats/Armrests
Seat Belts
Horn Functional
Control Lock Lever
Disconnect Control
Steering Controls
Powertrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Functional The rear lights are inoperable. The cover has been removed from fuse panel.
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer 3,042 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs) The components that were checked functioned except as noted.
Hour Meter/Odometer
 
Engine
Engine Make and Model Engine make: Cat; 3054C engine; Serial #: CR526834
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator Minor plugging of fins
Head Gasket Leaks None seen
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check - Compaction The drivetrain was operational during a limited check without a load.
 
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics) Weathered
Cylinders
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
 
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Does The Vibrator Work At All Speeds? Yes
Hydraulic Vibrator Motors
Drum Type and Width 67" drum width; Smooth drum
Drum Condition
Rubber Drum Isolators
Drum Scraper
Water System Unable to test
Frame Condition
Articulating Center Pins
Steering Linkage Wear consistent with hours and age
Steering Wheel Play Minor
Brake Type Hydrostatic
Limited Function Check (roller) The main chassis components functioned with minor to moderate wear in the pivot points.
Chassis #1
Oil Sample Analysis Engine Hydraulic
date of analysis Oct 06, 2009 Oct 06, 2009
Silicon 9 PPM 5 PPM
Lead 0 PPM 0 PPM
Tin 0 PPM 0 PPM
Copper 3 PPM 4 PPM
Aluminum 2 PPM 0 PPM
Silver 0.1 PPM 0 PPM
Nickel 0.7 PPM 0 PPM
Chromium 0.3 PPM 0.2 PPM
Iron 3 PPM 1 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details Back to top

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

  • Location: Washington, United States
  • Zip/Postal Code: 99301 (Richland-Kennewick-Pasco area)
  • The purchase of this item is subject to Washington sales tax unless certain conditions are met.
  • Hours: LOADING HOURS: 8:30 am - 3:30 pm; Mon-Fri.
  • Call at least one day in advance to schedule pickup.
  • NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
  • Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.

We Suggest You Also See...