• |
  • 888-433-5426
  • |
  • English
 Home Page / 2005 Case 865 Motor Grader w/Combination Ripper
 

2005 Case 865 Motor Grader w/Combination Ripper (#232158)

View other Daily Marketplace items

SOLD!
Winning Bid: US $68,000  
Won using: Win It Now

 Sold on: 12/7/09
 # of Bids: 1   View Bid History
 Buyer From: Mexico

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Enclosed cab with A/C components and heater, Cummins 6 cylinder diesel engine, powershift trans, 17.5-25 tires, 168" blade, combination ripper/scarifier, some grade control harness and components on machine; no control included. ***Seller Comments: Case Care 5000 hour, 48 Month Extended Warranty and Dealer Serviced (see records below).CONFIRM WARRANTY TRANSFERABILITY WITH YOUR LOCAL DEALER.
Meter Reading: 2,636 Hours
Serial Number:
Location: California, United States  
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark No
Paint Faded; scratches; chips
Sheet Metal (fiberglass) Condition Minor dents; scrapes; rust in paint loss areas
General Appearance #1
 
Control Station
Steps/Ladders Bent
Hand Rails
Mirrors
Glass
Seats/Armrests
Seat Belts
Horn Functional
Hydraulic Controls Residue
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises
Exterior Lights Operational Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer Functional; 2,636 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Ambient temperature too cold to check
Heater Functional
Limited Function Check The main components that could be checked were functional. There are loose cables and wire in the control station.
Hour Meter/Odometer
 
Engine
Make and Model Cummins 6 cylinder
Fuel Type Diesel
Emission Control Label US EPA certification label
Block Heater No
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None seen
Oil Leaks None seen; residue
Fuel Leaks None seen; bolt missing from line clamp
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. There is a loose strap tied to the fan housing. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) Powershift; 8F/4R speeds
Transmission Residue
Clutch
Rear Drive Axle Wet residue
Rear Tandems (Chain Drives) Seepage; residue; damaged bracket on left side
Final Drives
Limited Function Check The drivetrain functioned with leaks and damage during a limited check without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Residue
Valves
Hydraulic Tank
Hoses (Hydraulics) Residue
Cylinder(s)
Cylinder Pins and Bushings Worn; residue buildup
Limited Function Check The hydraulic system was operational with wear during a limited check without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle) Wet residue
Y-frame
Y-frame Pivot Trunnion Residue buildup
Circle Frame and Brackets
Circle Wear Strips Dry; worn
Circle Support Brackets
Circle Gear Box
Circle Gear Residue buildup
Mold Board Slide Wear Strips
Articulating Center Pins Wear
Front Axle Oscillating Pin Wear
Steering Linkage Residue
Steering Wheel Play Minimal
Wheel Tilt Linkage
Belly pans
Limited Function Check (grader) The main chassis components were functional with wear during a limited check.
Brake Type (Motorgrader) Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake Inoperable
Limited Function Check The brake system functioned, stopping and holding the machine. The park brake was inoperable.
Frame Condition
Tire Size 17.5-25
Tire Condition Cuts
Tread Depth (6 tires) (RF) 15mm; (LF) 17mm; (RM) 11mm; (LM) 4mm; (RR) 10mm; (LR) 11mm
Wheel Condition Residue buildup on front hubs
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition 168"; worn; bent
Blade Cutting Edge Condition (MG) Reversible; not turned; worn
Ripper Condition Worn shanks; heavy wear to teeth
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Oct 08, 2009 Oct 08, 2009
Silicon 3 PPM 8 PPM
Lead 0 PPM 0 PPM
Tin 0 PPM 2 PPM
Copper 37 PPM 285 PPM
Aluminum 0 PPM 0 PPM
Silver 0 PPM 0.2 PPM
Nickel 0.5 PPM 0.1 PPM
Chromium 0.5 PPM 0.3 PPM
Iron 23 PPM 51 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Extended Service Plan available
Powertrain Coverage.  Covers major drive train components- engine, torque hubs, transmission & front and rear axles - and more

Available in North America.  May be purchased by residents of U.S. and Mexico only, for equipment operated within U.S., Mexico or Canada.

OEM parts and service.  All repairs are made by an OEM authorized repair facility with genuine OEM replacement parts installed by OEM trained technicians.

Affordable plans.

Learn More