2008 Genie GTH1056 Telehandler (IronPlanet Item #230638)

SOLD!

Winning Bid: US $45,000

• Sold on: 11/5/09
• # of Bids: 1 View Bid History
• Buyer From: Pennsylvania

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here

Features:	Open operator station, frame leveling, Deere 4045H engine, powershift, 4x4, 14.00-24 tires, 10,000lbs max lift capacity, 56' max lift height, 48" forks, fork rotation.

Meter Reading:	242 Hours
Serial Number:	GTH1008A-12195
Location:	Florida, United States Zip/Postal Code: 32254 (Jacksonville area)
	Request shipping quote or additional assistance with transportation More Shipping Details
You may also be interested in these other items.

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Protected by IronClad Assurance®

General Appearance

Serial Number / VIN		GTH1008A-12195
CE Certification Label		No
Paint		Faded; Scratches; Chips
Sheet metal (fiberglass) condition		Minor dents/ scrapes; There is rust in paint loss areas.

Serial Number / VIN

Control Station

Steps/Ladders
Hand Rails
Mirrors
Seats/Armrests		Torn cover
Seat Belts
Horn		Functional
Disconnect Control
Hydraulic Controls
Steering Controls
Powertrain Controls
Oil Pressure		51 PSI
Engine Warning Lights		Functional
Travel Alarm		Functional
Gauges		Functional
Hour Meter/Odometer		Functional; 242 hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)		The main components functioned during a limited check.

Hour Meter/Odometer

Engine

Engine Make and Model		Deere 4045H engine; S/N: PE4045L029220
Fuel Type		Diesel
Emission Control Label		Both EPA and EU certification label
Blow by @ idle (subjective observation)		Minimal
Starter
Turbo or Blower		Operational
Injector Pump		Operational
Exhaust System
Radiator
Head Gasket Leaks		None seen
Oil Leaks		None seen
Fuel Leaks		None seen
Cooling System Leaks		None seen
Limited Function Check		The engine started and ran during a limited check.

Emission Control Label

Drivetrain

Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission		3 speed Powershift transmission; Oil residue at the pinion shaft
Torque Converter		Functional
Differential (front)		Oil residue at the pinion shaft housing
Differential (middle)		Oil residue at the pinion shaft housing
Differential (rear)		Oil residue at the pinion shaft housing
Final Drives
Limited Function Check		The drivetrain functioned during a limited check without a load.

Drivetrain #1

Chassis

IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Capacities		10,000 lbs max lift capacity; 56' max lift height
Mast/Boom Condition
Chain / Tensioners
Frame Leveling		Yes
Carriage Back Rest
Forks		48" forks
Fork Rotation		Yes; Functional
Steering Linkage
Steering Wheel Play		Minimal
Frame Condition
Limited Function Check		The main chassis components functioned during a limited check.
Brake Type		Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake		Held against power
Limited Function Check (Brakes)		The brake system functioned, stopping and holding the machine.
Tire Size		14.00-24 tires; Brand: PRIMEX
Tire Condition		Maintained inflation during inspection
Tread Depth		RF 15 mm; LF 16 mm; RR 16 mm; LR 16 mm
Wheel Condition
Wheel Studs, Nuts, Lugs

Chassis #1

Hydraulics

Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)		Weathered
Auxiliary Hydraulic Plumbing		Yes; Not functionally checked
Cylinders
Cylinder Pins and Bushings		Wear consistent with hours and age
Limited Function Check		The hydraulic system was operational during a limited check without a load.

Hydraulics #1

Oil Sample Analysis
Oil sample analysis not available.

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Request shipping quote or additional assistance with transportation

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Florida, United States
Zip/Postal Code: 32254 (Jacksonville area)
The purchase of this item is subject to Florida sales tax unless certain conditions are met.
Hours: 8 - 3 Mon - Fri
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Please call 24 hrs in advance to arrange pick up.

We Suggest You Also See...

2008 Genie GTH1056 Telehandler (#230638)