Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features:
Enclosed cab with A/C and heater, Cat 3176 engine, 152" stick length, 36" track width, 64" bucket. Attached Maintenance Records below indicate that the engine was replaced in Jan. 2009. Seller comments: Pins and bushings at the stick to bucket have been replaced with 0 hours on them.
Meter Reading:
9,913 Hours
Serial Number:
AGS01914
Location:
Florida, United States
Zip/Postal Code: 33607
(Tampa-St. Petersburg-Clearwater area)
The glass is dirty and the top glass has been replaced with plexiglas.
Seats/Armrests
Dirty; Burn holes
Seat Belts
Horn
Functional
Safety lock out/stop
Hydraulic Controls
The left horn button is torn.
Steering Controls
Powertrain Controls
Exterior Lights Functional
Yes
Engine Warning Lights
Functional
Travel Alarm
Functional
Gauges
Functional
Hour Meter/Odometer
Functional 9,913 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Functional; Vents damaged
Heater
Fan inoperable in some speeds
Limited Function Check (cs)
The components that were checked functioned except as noted.
Hour Meter/Odometer
Engine
Engine Make and Model
Cat 3176 Serial # 7ZR25069
Fuel Type
Diesel
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Radiator
Minor fin damage on the A/C cooler
Head Gasket Leaks
None seen
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Limited Function Check
The drivetrain functioned during a limited low speed check without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Oil residue
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cracked, Weathered Oil residue
Cylinders
Cylinder Pins and Bushings
Minor wear
Limited Function Check
The hydraulic system was operational during a limited check without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Wear consistent with hours and age
Pin and Bushings Stick to Bucket
Stick Length
152"
Turn-table Bearing
Performs within tolerance expected for age and hours
Bottom Covers
Bent
Swing Motor
Roller Frames
Limited Function Check (Backhoe)
The main components were functional with minimal wear.
Chassis #1
Undercarriage
Undercarriage components photos (links, bushings, sprockets, idlers, rollers, grousers) are selected as representative. Bidders are encouraged to review photos using the zoom feature to judge condition in detail.
Overall width (outside to outside of shoes)
143"
Track Tensioners
See photos
Shoe Width
36"
Grouser height
31-32mm
Track link wear
See photos
Pins and Bushings Turned?
No
Pins and bushing wear
See photos
Carrier rollers wear
See photos
Track rollers wear
See photos
Front idler wear
See photos
Sprockets
See photos
Undercarriage #1
Specialty
Excavator Bucket Condition
64 " Minor wear
Backhoe / Excavator Bucket Cutting Edge
Minor wear
Backhoe / Excavator Bucket Shanks and Teeth
Minor wear
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Oct 07, 2009
Oct 07, 2009
Silicon
3 PPM
0 PPM
Lead
0 PPM
4 PPM
Tin
3 PPM
2 PPM
Copper
19 PPM
6 PPM
Aluminum
0 PPM
3 PPM
Silver
0.1 PPM
0 PPM
Nickel
0.1 PPM
0.2 PPM
Chromium
0.2 PPM
0.8 PPM
Iron
3 PPM
40 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
888-433-5426
