• |
  • 888-433-5426
  • |
  • English
 Home Page / 2001 Caterpillar 980G Wheel Loader
 

2001 Caterpillar 980G Wheel Loader (#210538)

View other Daily Marketplace items

SOLD!
Winning Bid: US $55,000  
Won using: Win It Now

 Sold on: 11/23/09
 # of Bids: 3   View Bid History
 Buyer From: UAE

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Cab w/heat and A/C, Cat 3406 engine, powershift, 29.5-25 tires, 136" GP bucket
Meter Reading: 14,994 Hours
Serial Number:
Location: Texas, United States  
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Paint Scratches and chips
Sheet Metal (fiberglass) Condition Dents and damage; Surface rust
General Appearance #1
 
Control Station
Steps/Ladders Both sides are bent
Hand Rails Left side rails are damaged
Mirrors
Glass The rear glass is broken
Seats/Armrests Dirty
Seat Belts Dirty; Fraying
Horn Inoperable
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Engine Warning Lights Functional
Travel Alarm Functional
Gauges Functional
Hour Meter/Odometer 14494.8; Functional; Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Cool but not cold
Heater Functional
Limited Function Check The main components were functional with wear and damage as noted.
Hour Meter/Odometer
 
Engine
Make and Model Cat 3406; Serial #: 41Z20578
Fuel Type Diesel
Emission Control Label None found
Blow by @ idle (subjective observation) Minimal
Starter
Turbo or Blower Operational
Injector Pump Operational
Exhaust System
Radiator
Head Gasket Leaks None Seen
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran during a limited check. See oil report.
Make and Model
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Torque Converter Feels normal
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check Due to the confined area at the seller's location a complete check of all speeds could not be completed. The drivetrain did respond to the controls.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank Low oil level
Hoses (Hydraulics) Weathered
Cylinder(s) The right tilt cylinder is leaking
Cylinder Pins and Bushings Wear consistent with hours and age
Limited Function Check The hydraulic system performed with wear and / or leaks as noted. See oil report.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Articulating Center Pins
Steering Wheel Play Minor
Brake Type Hydraulic
Master Cylinder Soft pedal
Brake Lines/Hoses
Park Brake Inoperable
Limited Function Check The service brakes performed. The Park brake would not hold unit; Service brakes weak.
Frame Condition
Tire Size 29.5-25
Tire Condition Cuts; Gouges
Tread Depth (4 tires) RF 60 mm; LF 55 mm; RR 40 mm; LR 32 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition Scratched/chipped
Chassis to Arm Pins The keeper pins have been welded in place
Tilt Linkage Pins and Bushings
Bucket to Arm Pins
Quick Coupler to Arms Pins
Limited Function Check The main components were operational with wear and / or damage as noted.
Chassis #19 hole in top of cab
Chassis #1
 
Specialty
Loader Bucket Condition 136" General purpose loader bucket
Loader Bucket Cutting Edge Worn or missing teeth; Worn/damaged edge
Loader Bucket Condition
Oil Sample Analysis Engine Hydraulic
date of analysis Jun 18, 2009 Jun 18, 2009
Silicon 27 PPM 7 PPM
Lead 1 PPM 0 PPM
Tin 1 PPM 1 PPM
Copper 7 PPM 5 PPM
Aluminum 9 PPM 0 PPM
Silver 0.1 PPM 0 PPM
Nickel 1.1 PPM 0 PPM
Chromium 1.2 PPM 0 PPM
Iron 74 PPM 4 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Extended Service Plan available
Powertrain Coverage.  Covers major drive train components- engine, torque hubs, transmission & front and rear axles - and more

Available in North America.  May be purchased by residents of U.S. and Mexico only, for equipment operated within U.S., Mexico or Canada.

OEM parts and service.  All repairs are made by an OEM authorized repair facility with genuine OEM replacement parts installed by OEM trained technicians.

Affordable plans.

Learn More