There are dents, scrapes, damage, and holes on the sheet metal. There is significant rust and corrosion in the paint loss areas.
Serial Number / VIN
Control Station
Steps/Ladders
The right side steps are bent. The step has broken loose from the right side fender.
Hand Rails
The left side hand rails are bent.
Mirrors
Deteriorated silvering
Glass
The glass is dirty; The two rear side glasses are painted over.
Seats/Armrests
Seat Belts
Inoperable retract
Horn
Air; Functional
Hydraulic Controls
Loose
Steering Controls
Powertrain Controls
Exterior Lights Functional
Some Inoperable; The right headlight and signal light are inoperable.
Travel Alarm
Functional
Gauges
Functional
Hour Meter/Odometer
Functional; 1,480 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The main components were functional with wear and damage as noted.
Hour Meter/Odometer (Start)
Engine
Engine Make and Model
Cummins NTC300BC3 engine; Serial #: 60517449
Fuel Type
Diesel
Engine Brake
No
Emission Control Label
None found; Exempt
Block Heater
Yes
Blow by @ idle (subjective observation)
Minimal
Starter
Turbo or Blower
Operational
Injector Pump
Operational
Exhaust System
Rusty
Radiator
Plugging of fins; Fin damage
Head Gasket Leaks
None Seen
Oil Leaks
There is residue on the valve cover.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran during a limited check. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Functions but could not verify shifting in all ranges
Transmission Leaks
None Seen
Drive Line
Differential (front)
Leak
Differential (rear)
There is residue on the mid differential.
Limited Function Check (DT Vehicles)
The drivetrain was operational during a limited low speed check without a load. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Weathered
Cylinders
Cylinder Pins and Bushings
Minor wear
Limited Function Check
The hydraulic system was operational during a limited check without a load.
Hydraulics #1
Chassis
IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Steering Wheel Play
Minor
Brake Type
Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check (Brakes)
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Air Bags
Drop Axles
Frame Condition
Tire Size
Size: 445/65 R 22.5; Brand: Michelin, Goodyear, Bridgestone, Yokohama
Tire Condition
Cuts
Tread Depth
RF 13 mm; LF 18 mm; RR 16 mm; RMI 16 mm; LMI 16 mm; LR 17 mm
Appears functional in a limited test of forward and reverse rotation without a load. The air cylinder at the top of the drum leaks.
Chassis #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Mar 09, 2009
Mar 09, 2009
Silicon
2 PPM
3 PPM
Lead
1 PPM
22 PPM
Tin
3 PPM
1 PPM
Copper
6 PPM
107 PPM
Aluminum
2 PPM
7 PPM
Silver
0 PPM
0.2 PPM
Nickel
0.1 PPM
0.2 PPM
Chromium
0.8 PPM
0.2 PPM
Iron
15 PPM
34 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
Buyer will be responsible for any transportation charges issued by the driver.
Location: North Carolina, United States
Zip/Postal Code: 27705
(Raleigh-Durham-Chapel Hill area)
The purchase of this item is subject to North Carolina sales tax unless certain conditions are met.
Hours: M-F 9:00AM-4:00 PM
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
888-433-5426
You must be a Vehicle Dealer to purchase this vehicle in California.
