Genie Z208N Aerial Work Platform - 1-man lift (IronPlanet Item #158893)

SOLD!

Winning Bid: US $600

• Sold on: 12/13/07
• # of Bids: 3 View Bid History
• Buyer From: Wisconsin

Reminder : You must be registered and approved to purchase before bidding on this item. Register now or login here

Features:	48 volt electrical system, battery charger, 20' lift height, 18x6x14 solid tires

Meter Reading:	Not Available
Serial Number:	983-Cannot Verify Serial Number
Location:	Missouri, United States Need Help with Shipping? Need Help with Exporting? Zip/Postal Code: 63104 (St. Louis, MO-IL area)
	More Shipping Details

Inspection Report

Inspection Ratings Key
	New or recently replaced
	Performs within the tolerances expected for age and type of equipment
	Although performing, shows indication of needing repair or replacement
	Needs immediate repair/replacement. Requires work if it is to perform as expected

Summary

Protected by IronClad Assurance®

The main chassis components functioned with pivot point wear. The batteries would not hold a charge. The drivetrain felt weak. The hydraulic system performed when checked without a load. The sheet metal is good and the paint is fair.

General Appearance

Serial Number / VIN		NO SERIAL NUMBER OR MANUFACTURER'S IDENTIFYING NUMBER WAS FOUND. EXPORTING THIS MACHINE MAY BE DIFFICULT.
Paint		The paint is scratched and faded.
Sheet metal (fiberglass) condition		The sheet metal is dented and rusty.

Control Station

Hour Meter Reading		Reading: 2238; Operational - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Hydraulic Controls
Travel Alarm		Inoperable/missing
Limited Function Check (cs)		The components that were checked functioned except as noted.
Steps/Ladders
Hand Rails		The left side of the work platform is bent.
Horn
Safety lock out/stop
Hydraulic Controls
Steering Controls		Jerky; Stiff
Travel Alarm		Inoperable/missing
Limited Function Check (cs)		The components that were checked functioned except as noted.

Control Station #1

Drivetrain

Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors		Felt weak
Limited Function Check		Bogs when traveling and using other functions; The drivetrain was operational during a limited check without a load.

Hydraulics

Pumps (Hydraulics)
Hydraulic Motors
Valves		Seepage
Hydraulic Tank
Hoses (Hydraulics)		Weathered; Chafed; Cracked; Rusty fittings
Cylinders
Cylinder Pins and Bushings		Moderate wear
Limited Function Check		The system was operational during a limited check without a load.; The hydraulic system was operational with no unusual noises or visible leaks.

Hydraulics #1

Chassis

IronPlanet turn-table bearing and pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage		Noticeable movement
Frame Condition		Rusty
Tire Size		Front Size: 18x6x14; Rear size: 18x6x14; Brand Name: ITL
Tread Depth		R/F 3 mm; L/F 3 mm; R/R 3 mm; R/L 3 mm
Wheel Condition
Wheel Studs, Nuts, Lugs
JIB Condition
Cable Tray Ladder
Max Lift Height		20'
Work Basket		Railing bent; Damaged mesh; Control decal damage/overspray

Chassis #1

Note: This condition inspection report is the result of an impartial, systematic, documented process focused on the establishment of the general, overall mechanical condition of a piece of equipment, or of a vehicle, at a specific time. The purpose of the inspection is to establish the "as-is" operational capability of the machine. It is not a performance or load test on the equipment.

Shipping Details

Need Help with Shipping? Need Help with Exporting?

   Pickup Terms
   Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item.
   Buyer will be responsible for any transportation charges issued by the driver.

Location: Missouri, United States
Zip/Postal Code: 63104 (St. Louis, MO-IL area)
The purchase of this item is subject to Missouri sales tax unless certain conditions are met.
Hours: 8:00am - 4:00pm Monday - Friday
Call at least one day in advance to schedule pickup.
NO LOADING DOCK AVAILABLE: Only RGN and trailers with ramps can be used for pickup.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.


Home • About Us • Privacy • News • Forms • Contact Us
IronPlanet, Inc. © 2009 All Rights Reserved Terms & Conditions I r o n P l a n e t I n c .

Genie Z208N Aerial Work Platform - 1-man lift (#158893)