• |
  • 888-433-5426
  • |
  • English
 Home Page / 1998 Vermeer 1250BC-H Chipper
 

1998 Vermeer 1250BC-H Chipper (#158082)


SOLD!
Winning Bid: US $8,750  

 Sold on: 10/18/07
 # of Bids: 20   View Bid History
 Buyer From: Wisconsin
Bidders from California: You must be a Vehicle Dealer to purchase this vehicle in California. Why?

Reminder : You must be a member and approved to purchase before bidding on this item. Sign up now or sign in here
Features: Single axle trailer chassis mounted w/pintle hitch, Perkins LD33776 engine, hydraulic surge brakes. ***City owned and maintained.
Mileage: 1,195 Hours
VIN:
Location: Wisconsin, United States
Zip/Postal Code: 53704
(Madison area)
 
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
New or recently replaced
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
Summary Protected by IronClad Assurance®
The engine functioned well with noticeable leaks. The hydraulic system response was good. The sheet metal is good with rust areas. The paint is fair. The main chassis components performed with pivot point wear. The trailer was not pulled.
Maintenance Record
 
Serial Number / VIN
serial number / VIN 1VRC14132W1006377
serial number / VIN
 
General Appearance
sheet metal (fiberglass) condition The hood has been dented. The fenders are slightly bent and the chute is dented. There is surface rust in the paint loss areas.
paint The paint is chipped, faded, and scratched.
sheet metal (fiberglass) condition
 
Control Panel
gauges
hour meter operational
ignition switch
throttle control
kill switch
limited function check Functioned well with no noticeable damage.
gauges
 
Engine
hour meter reading 1195 hrs. - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
make & model Perkins
starter
exhaust system The muffler pipe is bent in and interferes with engine cover from opening.
oil dipstick tube & bonnet
blowby (checked at idle) Minor
oil pan & gasket
injector pump
fuel line & injector leaks Dirt residue
water pump
radiator
limited function check The engine started well with smoke that mostly cleared. Oil and dirt residue have accumulated on the font of the engine. See oil report.
hour meter reading
 
Drive System
belt engagement lever & linkage
belt tension adjuster
engine mounts
drive pulleys
drive belts
chipping wheel
chipping blades
feed rollers
limited function check The drive system functioned properly with no unusual noises when checked without a load and .
drive belts
 
Hydraulics
pumps
hoses Weathered
valves
motors
reservoirs
limited function check The hydraulic system performed properly when checked without a load. See oil report.
motors
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
frame
springs & hangers
u-bolts
axle condition
tire brand name Firestone
tire size LT235/85R16
tire condition Tire tread left-12/32; right- 12/32
wheel condition
wheel studs, nuts or bolts
hitch type Pintle type
leveling jack condition
lights
wiring
wiring connector
limited function check The component ratings are based on a static, visual check. The unit was not towed.
frame
 
Additional Photos
Photo #1
Oil Sample Analysis Engine Hydraulic
date of analysis Oct 01, 2007 Oct 01, 2007
Silicon 0 PPM 4 PPM
Lead 1 PPM 1 PPM
Tin 0 PPM 1 PPM
Copper 3 PPM 10 PPM
Aluminum 2 PPM 1 PPM
Silver 0 PPM 0 PPM
Nickel 0 PPM 0 PPM
Chromium 0.2 PPM 0 PPM
Iron 5 PPM 2 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Extended Service Plan available
Powertrain Coverage.  Covers major drive train components- engine, torque hubs, transmission & front and rear axles - and more

Available in North America.  May be purchased by residents of U.S. and Mexico only, for equipment operated within U.S., Mexico or Canada.

OEM parts and service.  All repairs are made by an OEM authorized repair facility with genuine OEM replacement parts installed by OEM trained technicians.

Affordable plans.

Learn More