1983 Athey 2TE4 Mobile Street Sweeper
(#129600)
|
| Features: |
Cab w/heat, GM V-8 carrier engine, Deere sweeper engine, auto trans., water system |
|
|
|
Meter Reading:
|
64,963 Miles
|
|
Serial Number:
|
|
| Location: |
California, United States
Zip/Postal Code: 93111
(Santa Barbara-Santa Maria-Lompoc area)
|
|
|
picture, brochure
|
| Inspection Ratings Key |
 |
New or recently replaced
|
 |
Performs within the tolerances expected for age and type of item |
 |
Although performing, shows indication of needing repair or replacement |
 |
Needs immediate repair/replacement. Requires work if it is to perform
as expected |
|
|
| |
| General Appearance |
| sheet metal (fiberglass) condition |
|
|
| paint |
|
|
|
picture, front
|
| |
| Operator Station |
| steps/ladders |
|
|
| hand rails |
|
|
| mirrors |
|
|
| glass |
|
|
| seats/armrests |
|
|
| seat belts |
|
|
| exterior lights |
|
|
| horn |
|
|
| safety alarms |
|
|
| oil pressure |
|
|
| gauges |
|
|
| hour meter operational |
|
|
| air conditioner |
|
|
| heater |
|
|
| hydraulic controls |
|
|
| steering controls |
|
|
| powertrain controls |
|
|
| limited function check |
|
|
|
seats/armrests
|
| |
| Engine |
| hour meter |
|
|
| make & model |
|
|
| serial # |
|
|
| emission control label |
|
|
| starter |
|
|
| battery |
|
|
| exhaust system |
|
|
| cylinder head gasket |
|
|
| blowby (checked at idle) |
|
|
| valve cover gasket |
|
|
| oil pan & gasket |
|
|
| injector pump |
|
|
| fuel line & injector leaks |
|
|
| radiator |
|
|
| limited function check |
|
|
|
hour meter
|
| |
| Sweeper Engine |
| engine make and model |
|
|
| limited function check |
|
|
|
engine make and model
|
| |
| Powertrain |
| transmission type |
|
|
| torque converter |
|
|
| rear differential |
|
|
| limited function check |
|
|
|
rear differential
|
| |
| Chassis |
| IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed. |
| springs and hangers |
|
|
| steering linkage |
|
|
| steering wheel play |
|
|
| limited function check |
|
|
| brake type |
|
|
| master cylinder |
|
|
| brake lines/hoses |
|
|
| park brake |
|
|
| limited function check |
|
|
| tire brand name |
|
|
| tire size |
|
|
| tire condition |
|
|
| wheel condition |
|
|
| wheel studs, nuts or bolts |
|
|
|
tire brand name
|
| |
| Hydraulics |
| pumps |
|
|
| valves |
|
|
| hoses |
|
|
| cylinders |
|
|
| cylinder pins and bushings |
|
|
| motors |
|
|
| limited function check |
|
|
|
cylinders
|
| |
| Specialty Equipment |
| broom |
|
|
|
broom
|
| |
| Additional Photos |
|
|
Photo #1
|
| Oil Sample Analysis |
sweeper eng. |
engine |
transmission |
| date of analysis |
Sep 02, 2005 |
Sep 02, 2005 |
Sep 02, 2005 |
| analysis by |
Spectro, Inc. - Crowley, TX |
Spectro, Inc. - Crowley, TX |
Spectro, Inc. - Crowley, TX |
| comments |
Nickel and aluminum appear high normal, this could be valve and piston or possible gear and case wear. Silicon is elevated, check the air induction for leaks. Fuel is less than 5 percent. |
Normal wear. Fuel dilution is less than 5%. |
Copper appears high normal, this could be bushing wear, unless the unit has copper wear plates. |
| Sodium |
7 PPM |
3 PPM |
4 PPM |
| Aluminum |
20 PPM |
2 PPM |
1 PPM |
| Water |
0 |
0 |
0 |
| Lead |
12 PPM |
3 PPM |
3 PPM |
| Copper |
2 PPM |
2 PPM |
39 PPM |
| Magnesium |
7 PPM |
5 PPM |
2 PPM |
| Tin |
2 PPM |
1 PPM |
02 PPM |
| Chromium |
1.5 PPM |
0 PPM |
0 PPM |
| Nickel |
3.1 PPM |
0.8 PPM |
0.1 PPM |
| Silver |
0 PPM |
0 PPM |
0 PPM |
| Iron |
38 PPM |
7 PPM |
29 PPM |
| Glycol |
0 |
0 |
0 |
| Silicon |
92 PPM |
12 PPM |
5 PPM |
|
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
|
- Buyer is responsible for all costs related to transporting the item.
- Item must be picked up within 8 business days of the auction.
- The exact item location will be provided once full payment has been received.
Shipping Quotes
-
You may request a quote now by contacting any of our Transportation Partners
-
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms
Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
- Hours: 8:00am - 3:30pm; M-F
- You must call at least 24 hours in advance to schedule pickup
- No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
- Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
- Please call to arrange pickup.
-
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 27.
- This item is subject to 8% California sales tax unless proof of exemption or declaration of Common Carrier shipment to another state is presented during item Checkout. (Read more)
- Buyer must pay a transaction fee (see Buyer fees).
- Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
- All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee Penalty.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital 
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and forward to Bryan
Grittner or fax the application to (469) 519-4394.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit
Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Pinnacle Capital 
Full Spectrum Financing for IronPlanet Auctions
IronPlanet has been offering financing for your purchases through a
partnership with Pinnacle Capital since 2002. Pinnacle knows what it takes to
get auction deals done fast and has facilitated several millions of dollars in
online purchases. Get a pre-approved line of credit set-up before you place a
bid to confirm your buying power. Click here to learn more about Pinnacle's financing products.
To qualify, complete Pinnacle's online
application. Once approved, they'll take care of the rest. Please contact
Matt Perini at 800-566-1993 or by
email to discuss the transaction further.
*Currency conversions are an estimate provided for informational purposes only.
|
888-433-5426
