The engine and powertrain responded well with minor leaks. The chassis components are in good condition. The crane chassis components functioned properly. The hydraulic system has many leaks. The concrete cutter on the bed of the truck is not included. The sheet metal is good and the paint is fair.
General Appearance
sheet metal (fiberglass) condition
paint
The paint is faded and chipped.
paint
Operator Station
steps/ladders
hand rails
mirrors
glass
One minor chip on the passenger side glass.
seat/armrests
seat belt
horn
powertrain controls
steering controls
hydraulic controls
oil pressure
30psi
exterior lights operational
Yes
engine warning lights operational
Yes
gauges operational
Yes
hour meter operational
Yes
odometer operational
Yes
air conditioner operational
Yes
heater operational
Yes
limited function check
The components that were checked performed properly with no noticeable damage.
gauges operational
Engine
hour meter/odometer reading
4,519 hours/100,088 miles - IronPlanet makes no guarantees as to actual hours/miles, we can only report what can be visually observed.
make & model
Caterpillar 3306
emission control label
Exempt
block heater
None Seen
blowby (checked at idle)
Minor
starter
battery
turbocharger
exhaust system
injector pump
radiator
air compressor
There are leaks at the air compressor.
exhaust leaks
None Seen
oil leaks
Yes - The valve cover gasket is leaking.
cylinder head gasket leaks
None Seen
fuel line & injector leaks
Yes - The #6 injector is leaking.
cooling system leaks
None Seen
limited function check
The engine started easily and ran well with no unusual noises. See the oil analysis report for further details.
make & model
Powertrain
transmission type
Manual shift
clutch
power take off
differentials
limited function check
The powertrain responded well in a limited area. The unit could only be moved forward and backward for a short distance.
transmission type
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
springs & hangers
walking beams
external electrical/air connections
Yes
frame condition
steering linkage
steering wheel play
Minor
limited function check
The main chassis components functioned properly with minor to moderate wear in the pivot points. The right front hub is leaking oil.
brake type
Air
master cylinder
brake lines/hoses
park brake
limited function check
The brake system functioned properly when checked on flat ground at low speeds.
tire condition
Kelly, Toyo, Bridgestone, Michelin, General & Kumho
The remote control system could not be operated. The main chassis components functioned properly with minor to moderate wear in the pivot points.
boom & jib condition
Hydraulics
pumps
Leaking
valves
Leaking
hoses
Leaking
cylinders
cylinder pins and bushings
limited function check
The system was functional with wear as noted. The underside of the truck is coated in oil.
Additional Photos
Photo #1
Oil Sample Analysis
engine
date of analysis
June 02, 2005
analysis by
Spectro, Inc. - Crowley, TX
comments
Copper appears high normal, this could be bushing wear, bearing wear or even an additive in the oil. Fuel dilution is less than 5 percent.
Tin
2 PPM
Chromium
0.4 PPM
Copper
23 PPM
Nickel
0.8 PPM
Lead
4 PPM
Magnesium
304 PPM
Water
0
Silver
0.4 PPM
Iron
18 PPM
Silicon
3 PPM
Sodium
3 PPM
Aluminum
2 PPM
Glycol
0
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible. Please contact IronPlanet Customer Care at 888-433-5426 to file a dispute, and please review the Terms & Conditions, to which all approved bidders have agreed.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction.
The exact item location will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-5
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 21.
This item is subject to 5% Virginia sales tax unless proof of exemption or declaration of Common Carrier shipment to another state is presented during item Checkout. (Read more)
Buyer must pay a transaction fee (see Buyer fees).
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
A transferable title will be sent to the buyer by express mail or similar service within 15 business days of the auction. Buyer is responsible for vehicle registration.
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee Penalty.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and forward to Bryan
Grittner or fax the application to (469) 519-4394.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Pinnacle Capital
Full Spectrum Financing for IronPlanet Auctions
IronPlanet has been offering financing for your purchases through a
partnership with Pinnacle Capital since 2002. Pinnacle knows what it takes to
get auction deals done fast and has facilitated several millions of dollars in
online purchases. Get a pre-approved line of credit set-up before you place a
bid to confirm your buying power. Click here to learn more about Pinnacle's financing products.
To qualify, complete Pinnacle's online
application. Once approved, they'll take care of the rest. Please contact
Matt Perini at 800-566-1993 or by
email to discuss the transaction further.
Powertrain Coverage. Covers major drive train components- engine, torque hubs, transmission & front
and rear axles - and more
Available in North America. May be purchased by residents of U.S. and Mexico only, for equipment operated
within U.S., Mexico or Canada.
OEM parts and service. All repairs are made by an OEM authorized repair facility with genuine OEM replacement
parts installed by OEM trained technicians.
888-433-5426
You must be a Vehicle Dealer to purchase this vehicle in California.
