Enclosed Cab, Heater, Autoshift, Volvo TD71G Engine, Manual Coupler, 23.5R25 Tires, 9' 3" Wide General Purpose Bucket
“**Seller is equipped to provide tear-down and transportation quotes. Please call with appropriate advance notice if required.**”
Meter Reading:
39,103 Hours
Serial Number:
Location:
Tennessee, United States
Zip/Postal Code:38551
(Clay County)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Scratches; Chips; Concrete residue; See photos for condition
Sheet Metal (Fiberglass) Condition
Dents; Surface rust; Damage; Holes; Metal corrosion; Metal erosion; Bent panels; Missing panels/bolts; Fenders bent/damaged; Rust eating through in areas; Fabricated guards at engine; See photos for condition
Steps/Ladders
See photos for condition; Some loose; Some bent
Hand Rails
See photos for condition; Bent; Damaged
General Appearance #1
Control Station
Mirrors
Glass
Right: Cracked; Right window held shut with wire and does not seat properly
Seats/Armrests
Torn cover
Seat Belts
Operational
Horn
Operational
Hydraulic Controls
Fluid accumulation
Steering Controls
Drivetrain Controls
Oil Pressure
Warning light inoperable
Exterior Lights Operational
Yes, but some missing
Warning Lights
Inoperable
Travel Alarm
Operational
Gauges
Inoperable gauges: All except engine temp. inoperable; Broken needle at temp gauge
Hour Meter/Odometer
39,103 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable; Vents damaged; Controls inoperable; Knobs missing at controls
See photos; Fluid Accumulation: Side of engine; Fluid Accumulation: Front of engine; Fluid Accumulation: Oil Pan; Fluid Accumulation: Rear of engine
Fuel Leaks
See photos; Fluid Accumulation: Injection pump
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. There is a tapping noise in the engine. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Fluid accumulation
Front Drive Axle
Fluid Accumulation; Left side fluid accumulation
Rear Drive Axle
Fluid Accumulation; Right side fluid accumulation
Final Drives
Material residue; Fluid accumulation
Limited Function Check
The drivetrain was operational. The autoshift is inoperable. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Fluid accumulation
Valves
Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics)
On Machine: Worn; Seepage
Loader Lift Cylinders
Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder
Bucket Tilt Cylinders
Seepage on the left cylinder; Seepage on the right cylinder
Steering Cylinders
Scratches on rams
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Articulating Center Pins
Minor to visible movement
Brake Type
Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake
Stopped from a slow roll
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Material residue
Tire Brands
Left Front: Continental; Right Front: Continental; Right Rear: Michelin; Left Rear: Bridgestone
Tire Condition
See photos; Cuts and gouges
Wheel Condition
Material residue
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Material residue; Rusty
Tilt Linkage
Chassis to Arm Pins
Minor to moderate movement
Tilt Linkage Pins and Bushings
Heavy movement
Quick Coupler to Arms Pins
Heavy movement
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Specialty
Loader Bucket Condition
Worn; Material residue; Bent spill guard
Loader Bucket Cutting Edge/Shanks/Teeth
Worn edge; Reversible-turned
Loader Quick Coupler
Manual quick coupler with pins that have to be manually removed; Not operationally checked
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Aug 10, 2012
Aug 10, 2012
Silicon
2 PPM
5 PPM
Lead
3 PPM
2 PPM
Tin
0 PPM
0 PPM
Copper
2 PPM
13 PPM
Aluminum
2 PPM
1 PPM
Silver
0.1 PPM
0.2 PPM
Nickel
0.8 PPM
0 PPM
Chromium
0.8 PPM
0 PPM
Iron
39 PPM
8 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: M-F 8:00 A.M. - 3:00 P.M.
Make and Confirm Arrangements 48 Hours in Advance. Seller Will Load for $85.00 an Hour.
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 21.
This item is subject to Tennessee sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
