The main components operated except as noted. Some components could not be operationally checked. The onboard scale was not operationally checked.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Rust penetration; Leaks at connections; See photos for condition
Radiator
Significant plugging of fins
Oil Leaks
Yes; Fluid accumulation: Valve cover; Side/Front/Rear of engine; Oil pan; Very dirty; Hard to see any source of leaks; Sources of leaks unknown; See photos
Fuel Leaks
See photos
Cooling System Leaks
See photos
Limited Function Check (Engine)
After jump starting the engine ran. The engine compartment lower section had large build-ups of oil and dust and it was very difficult to determine the sources and types of leaks. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational; Low oil level; Seepage
Front Drive Axle
Fluid accumulation
Rear Drive Axle
Fluid accumulation
Limited Function Check
The drivetrain was operational in a very limited test and inspector did not shift through all speeds. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Not visually inspected
Valves
Not visually inspected
Hydraulic Tank
Low oil level
Hoses (Hydraulics)
Front Loader: Worn; Tractor: Worn; Hoses are covered with wire protective cover
Loader Lift Cylinders
Fluid accumulation on the left cylinder; Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Fluid accumulation on the left cylinder; Dripping leak on the right cylinder; Minor to moderate pin and bushing movement
Steering Cylinders
Fluid accumulation on the left & right cylinders; Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Articulating Center Pins
Minor to visible movement; Limited test from cab
Brake Type
Hydraulic
Master Cylinder
Brake Lines/Hoses
Very dirty; Heavy build-up; Could not determine if lines are leaking; Too much dirt and grease accumulation; See photos
Park Brake
Unable to test with slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Left front: Firestone; Right front: General; Right rear: Firestone; Left rear: Firestone
Tire Condition
Cuts; Gouges; Minor cuts and gouges; See photos
Wheel Condition
Slight dents
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Dented at stops
Tilt Linkage
Chassis to Arm Pins
Minor to moderate movement; Limited test
Tilt Linkage Pins and Bushings
Minor to moderate movement; Limited test
Bucket to Arm Pins
Minor to moderate movement
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Specialty
Loader Bucket Condition
Worn; Worn thin; Material residue; Cracked; Weld repaired; Internal heavy wear damage; See photos
Loader Bucket Cutting Edge/Shanks/Teeth
Reversible; Not turned
Drawbar
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jul 23, 2012
Jul 23, 2012
Silicon
5 PPM
11 PPM
Lead
2 PPM
2 PPM
Tin
0 PPM
0 PPM
Copper
2 PPM
338 PPM
Aluminum
1 PPM
2 PPM
Silver
0.1 PPM
0.2 PPM
Nickel
0.5 PPM
0 PPM
Chromium
0.3 PPM
0.1 PPM
Iron
21 PPM
12 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00 am - 3:00 pm; Mon-Fri
Call 24 hours in advance to schedule pick up
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 7.
This item is subject to New York sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
