Blemishes where decals have been removed; Touch up paint; Scratches; Chips
Sheet Metal (Fiberglass) Condition
Dents; Cracks; Surface rust; Some latches inoperable; Metal corrosion; Metal erosion; Bent panels; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
No visible damage
Seats/Armrests
Damaged armrest; Loose cushion
Seat Belts
Operational
Horn
Inoperable
Control Lock Lever
Missing
Hydraulic Controls
3rd Valve
Equipped with a 3rd valve and plumbing for an auxiliary attachment.
Steering Control
Drivetrain Controls
Foot pedal sticks; Stiff
Transmission Disconnect
Inoperable
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
14,055 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational; Vents damaged
Interior
Floor mat: Worn; Floor mat: Damaged and worn; Headliner: Damaged
Limited Function Check (cs)
The main components operated except as noted. Loose flasher, control held with tie wrap; Floor mat: Damaged and worn; Head liner and upholstery damaged
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational; Fluid accumulation; Seller Comments: There is an issue with the transmission. The transmission heats up during operation.
Front Drive Axle
Fluid Accumulation
Rear Drive Axle
Fluid Accumulation
Final Drives
Limited Function Check
The drivetrain was operational during a limited check. Transmission issue. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Fluid accumulation
Valves
Fluid accumulation
Hydraulic Tank
Fluid accumulation; Surface rust; Damaged cap
Hoses (Hydraulics)
Extra Hyd. hose; Front Loader: Worn; Tractor: Worn; Front Loader: Braid Exposure
Loader Lift Cylinders
Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Heavy pin and bushing movement
Steering Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Articulating Center Pins
Minor to visible movement
Brake Type
Air over hydraulic
Master Cylinder
Stiff
Brake Lines/Hoses
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Weld repair; Surface Rust
Tire Brands
Bridgestone
Tire Condition
Cuts; Gouges; Radial
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Dented at stops
Tilt Linkage
Cracks
Chassis to Arm Pins
Minor to moderate movement
Tilt Linkage Pins and Bushings
Heavy movement
Quick Coupler to Arms Pins
Heavy movement
Limited Function Check
The main components were operational with movement as indicated.
Hydraulic coupler not operational; Wear at pin connections
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jul 16, 2012
Jul 16, 2012
Silicon
4 PPM
3 PPM
Lead
0 PPM
3 PPM
Tin
0 PPM
0 PPM
Copper
2 PPM
83 PPM
Aluminum
1 PPM
1 PPM
Silver
0.1 PPM
0.2 PPM
Nickel
0.3 PPM
0 PPM
Chromium
0.5 PPM
0.1 PPM
Iron
7 PPM
11 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 7:30AM to 5:00PM; Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 5.
This item may be subject to Newfoundland and Labrador sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
