Enclosed Cab, A/C, Heater, Volvo Diesel Engine, Powershift, GP Loader Bucket, 29.5-R25 Michelin Tires. No CE certificate available from seller - No CE mark on machine.
Meter Reading:
12,060 Hours
Serial Number:
Location:
Zeeland, Netherlands
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
***This machine will be available in Antwerpen from 6th March***
General Appearance
CE Certificate Available
No CE certificate available from seller - No CE mark on machine
Paint
Touch up paint; Scratches; Chips
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Cracks; Surface rust in areas
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
Front: Cracked
Seats/Armrests
Seat Belts
Operational
Horn
Operational
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
12,060 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Make and Model
Volvo; D12D engine; Serial #: 636610; 6 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Cracked; Leaks; See photos for condition
Radiator
Oil Leaks
Fluid Accumulation: Valve cover; Seepage: Side of engine; Seepage: Front of engine; Fluid Accumulation: Oil Pan
Fuel Leaks
None seen
Cooling System Leaks
Fluid Accumulation: Radiator hose
Limited Function Check (Engine)
The engine started and ran.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Residue
Transmission Disconnect
Operational
Front Drive Axle
Rear Drive Axle
Fluid Accumulation
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics)
Weathered
Loader Lift Cylinders
Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder; Moderate Wear
Bucket Tilt Cylinders
Moderate Wear, Fluid accumulation
Steering Cylinders
Fluid accumulation on the left cylinder
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Moderate Movement
Articulating Center Pins
Minor to visible movement
Steering Wheel Play
Minor
Brake Type
Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake
Stopped from a slow roll
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Rusty
Tire Size
29.5-R25 front tires; 29.5-R25 rear tires; Brand: Michelin
Tire Condition
Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Moderate to Heavy movement
Tilt Linkage Pins and Bushings
Moderate to Heavy Movement
Bucket to Arm Pins
Moderate to Heavy Movement
Limited Function Check
The main chassis components were operational in a limited check.
Chassis #1
Specialty
Loader Bucket Condition
Cracked
Loader Bucket Cutting Edge
Specialty #1
Oil Sample Analysis
engine
date of analysis
Jun 19, 2012
Silver
N/A
Water
0
Aluminum
3 PPM
Chromium
0.4 PPM
Nickel
0 PPM
Copper
12 PPM
Iron
32 PPM
Silicon
4 PPM
Glycol
0
Tin
1 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: TBC
TBC
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 27.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
