Enclosed Cab, A/C, Heater, Diesel Engine, 3rd Valve, Autoshift, Ride Control, Hydraulic Coupler, 20.5R25 Tyres, New GP Bucket Supplied. CE certificate available from seller - CE mark on machine
Meter Reading:
5,371 Hours
Serial Number:
Location:
Castilla y Leon, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips; Some panels re-painted
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Surface rust in areas; Weld repairs
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Cracked; Missing
Glass
Front: Damaged weather stripping; Silicon residue on front glass, Door seal damaged
Seats/Armrests
Torn cover; Missing armrest
Seat Belts
Operational
Horn
Operational
Control Lock Lever
Hydraulic Controls
Damaged boots; Loose; Worn
3rd Valve
Equipped with a 3rd valve and plumbing for an auxiliary attachment.
Steering Controls
Loose
Drivetrain Controls
Loose
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes; Some inoperable
Engine Warning Lights
Operational
Travel Alarm
Operational; Weak
Gauges
Operational
Hour Meter/Odometer
5,371 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational; Cool but not cold; Vents damaged
Heater
Operational; Vents damaged
Limited Function Check
The main components operated except as noted.
3rd Valve
Engine
Make and Model
6 Cylinder Engine; label is worn and unable to dead
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Weld repair; See photos
Radiator
Minor plugging of fins
Oil Leaks
None seen; Fluid Accumulation: Side of engine
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Disconnect
Operational
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational except as noted. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
When hydraulic functions are operated there is a slight noise in the system
Valves
Hydraulic Tank
Hoses (Hydraulics)
Front Loader: Loose; Tractor: Loose; Front Loader: Worn; Tractor: Worn; Front Loader: Leaks; Tractor: Leaks; Front Loader: Braid Exposure; Tractor: Braid Exposure; Tractor: Seepage
Loader Lift Cylinders
Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Minor to moderate pin and bushing movement
Steering Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
Some functions were noisy.; The hydraulic system was operational except as noted.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Articulating Center Pins
Heavy movement
Steering Wheel Play
Minimal movement
Brake Type
Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake
Inoperable
Limited Function Check
The service brakes performed. The park brake would not hold the machine.
Frame Condition
Tire Size
20.5R25 tires; Front: Bolgase; Rear: Techking
Tire Condition
Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Coupler tilt stops - Weld Repair
Chassis to Arm Pins
Minor to moderate movement
Tilt Linkage Pins and Bushings
Minor to moderate movement
Quick Coupler to Arms Pins
Heavy movement
Limited Function Check
The main components were operational except as noted.
Chassis #1
Specialty
Loader Bucket Condition
New GP Bucket Supplied
Loader Bucket Cutting Edge
Loader Quick Coupler
Hydraulic coupler operational; Wear at connections; Seepage; Welds
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Apr 05, 2012
Apr 05, 2012
Silicon
8 PPM
6 PPM
Lead
0 PPM
0 PPM
Tin
0 PPM
0 PPM
Copper
2 PPM
3 PPM
Aluminum
3 PPM
0 PPM
Silver
N/A
N/A
Nickel
1 PPM
0 PPM
Chromium
0.6 PPM
0 PPM
Iron
21 PPM
28 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9 - 17hs - Call 24hs before
Please check loading facilities' suitability directly with seller
Loading Dock Available
Ramps NOT Available
Forklift NOT Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before October 1.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
