| Features: |
Enclosed Cab, A/C, Heater, Cat Diesel Engine, Command Control Steering, Autoshift, Boom Suspension, General Purpose Bucket, 26,5R25 Tires, No CE certificate available from seller - CE mark on machine, |
|
|
|
Meter Reading:
|
16,063 Hours
|
|
Serial Number:
|
|
| Location: |
Kobenhavns, Denmark
|
|
Shipping:
|
See shipping details for important pickup requirements and to get a shipping estimate
|
|
Inspection Report :
|
Protected by IronClad Assurance
|
|
Payment:
|
Payment due within 3 business days after auction. See Details
|
|
picture, brochure
|
| Inspection Ratings Key |
 |
Limited use or recently replaced, free of visible wear or defects
|
 |
Performs within the tolerances expected for age and type of item |
 |
Although performing, shows indication of needing repair or replacement |
 |
Needs immediate repair/replacement. Requires work if it is to perform
as expected |
|
|
| |
| General Appearance |
| CE Certificate Available |
|
|
| Paint |
|
|
| Sheet Metal (Fiberglass) Condition |
|
|
| Steps/Ladders |
|
|
| Hand Rails |
|
|
|
CE Mark (on or near data plate)
|
| |
| Control Station |
| Mirrors |
|
|
| Glass |
|
|
| Seats/Armrests |
|
|
| Seat Belts |
|
|
| Horn |
|
|
| Control Lock Lever |
|
|
| Hydraulic Controls |
|
|
| Steering Controls |
|
|
| Drivetrain Controls |
|
|
| Transmission Disconnect |
|
|
| Oil Pressure |
|
|
| Exterior Lights Operational |
|
|
| Engine Warning Lights |
|
|
| Gauges |
|
|
| Hour Meter/Odometer |
|
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
|
| Air Conditioner |
|
|
| Heater |
|
|
| Limited Function Check |
|
|
|
Hour Meter/Odometer (Start)
|
| |
| Engine |
| Make and Model |
|
|
| Fuel Type |
|
|
| Emission Control Label |
|
|
| Starter |
|
|
| Turbo or Blower |
|
|
| Fuel System |
|
|
| Exhaust System |
|
|
| Radiator |
|
|
| Oil Leaks |
|
|
| Fuel Leaks |
|
|
| Cooling System Leaks |
|
|
| Limited Function Check |
|
|
|
Blow by @ idle (subjective observation)
|
| |
| Drivetrain |
| Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage. |
| Transmission |
|
|
| Front Drive Axle |
|
|
| Rear Drive Axle |
|
|
| Final Drives |
|
|
| Limited Function Check |
|
|
|
Drivetrain #1
|
| |
| Hydraulics |
| Pumps (Hydraulics) |
|
|
| Valves |
|
|
| Hydraulic Tank |
|
|
| Hoses (Hydraulics) |
|
|
| Loader Lift Cylinders |
|
|
| Bucket Tilt Cylinders |
|
|
| Steering Cylinders |
|
|
| Limited Function Check |
|
|
|
Hydraulics #1
|
| |
| Chassis |
| IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed. |
| Articulating Center Pins |
|
|
| Brake Type |
|
|
| Master Cylinder |
|
|
| Brake Lines/Hoses |
|
|
| Limited Function Check |
|
|
| Frame Condition |
|
|
| Tire Brands |
|
|
| Tire Condition |
|
|
| Wheel Condition |
|
|
| Wheel Studs, Nuts, Lugs |
|
|
| Lift Arm Condition |
|
|
| Tilt Linkage |
|
|
| Chassis to Arm Pins |
|
|
| Tilt Linkage Pins and Bushings |
|
|
| Bucket to Arm Pins |
|
|
| Limited Function Check |
|
|
|
Chassis #1
|
| |
| Specialty |
| Loader Bucket Condition |
|
|
| Loader Bucket Cutting Edge/Shanks/Teeth |
|
|
|
Specialty #1
|
| Oil Sample Analysis |
Engine |
Hydraulic |
Transmission |
| date of analysis |
Jun 19, 2012 |
Jun 19, 2012 |
Jun 19, 2012 |
| Silicon |
9 PPM |
4 PPM |
0 PPM |
| Lead |
0 PPM |
1 PPM |
0 PPM |
| Tin |
0 PPM |
0 PPM |
0 PPM |
| Copper |
0 PPM |
5 PPM |
1 PPM |
| Aluminum |
1 PPM |
2 PPM |
1 PPM |
| Silver |
N/A |
N/A |
N/A |
| Nickel |
0 PPM |
0 PPM |
0 PPM |
| Chromium |
0 PPM |
1.9 PPM |
0 PPM |
| Iron |
10 PPM |
11 PPM |
4 PPM |
| Glycol |
0 |
N/A |
N/A |
| Water |
0 |
NEG |
NEG |
| Fuel |
N/A |
N/A |
N/A |
|
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
|
- Buyer is responsible for all costs related to transporting the item.
- Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
- The location information will be provided once full payment has been received.
Shipping Quotes
Pickup Terms
Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
- Hours: 7.00 - 16.00 hrs
- Please call at least 24 hours before pickup
- No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
- Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
-
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
- Buyer must pay a transaction fee, based on the final selling price:
| Final Selling Price |
Transaction Fee |
| €1 to €5,000 |
10% of the final selling price |
| €5,000 to €31,800 |
3.85% of the final selling price (min €500) |
| Above €31,800 |
€1,225 |
- Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
- All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work
Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
*Currency conversions are an estimate provided for informational purposes only.
|
Warranty by Premium 2000
