Enclosed Cab, A/C, Heater,Komatsu Diesel Engine, Autoshift, General Purpose Bucket, 26,5R25 Tires, No CE certificate available from seller - CE mark on machine
Meter Reading:
19,668 Hours
Serial Number:
Location:
Kobenhavns, Denmark
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No visible damage; Weld repair; See photos for condition
Radiator
Low coolant level; Minor plugging of fins
Oil Leaks
See photos; Fluid Accumulation: Side of engine
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational, Seepage
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Fluid accumulation
Hydraulic Tank
Low oil level
Hoses (Hydraulics)
Loader Lift Cylinders
Minor pin and bushing movementl;Fluid accumulation
Bucket Tilt Cylinders
Minor pin and bushing movement ; Fluid accumulation
Steering Cylinders
Minor pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Articulating Center Pins
Minimal movement
Brake Type
Hydraulic
Master Cylinder
Brake Lines/Hoses
Not operationally checked
Park Brake
Held on slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Surface Rust
Tire Brands
Goodyear
Tire Condition
See photos; Cuts; Plugs; Low air; Left front wheel is low in air.
Wheel Condition
Rusty
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Dented at stops
Tilt Linkage
Chassis to Arm Pins
Minior movement
Tilt Linkage Pins and Bushings
Minor movement
Bucket to Arm Pins
Minor to moderate movement
Limited Function Check
The main chassis components were operational in a limited check.
Chassis #1
Specialty
Loader Bucket Condition
3000mm General purpose loader bucket; Worn
Loader Bucket Cutting Edge/Shanks/Teeth
Worn edge
Specialty #1
Oil Sample Analysis
Engine
Hydraulic
Transmission
date of analysis
Jun 19, 2012
Jun 19, 2012
Jun 19, 2012
Silicon
9 PPM
10 PPM
9 PPM
Lead
0 PPM
1 PPM
0 PPM
Tin
0 PPM
0 PPM
0 PPM
Copper
0 PPM
1 PPM
0 PPM
Aluminum
1 PPM
1 PPM
0 PPM
Silver
N/A
N/A
N/A
Nickel
0 PPM
0 PPM
0 PPM
Chromium
0 PPM
0 PPM
0 PPM
Iron
6 PPM
2 PPM
8 PPM
Glycol
0
N/A
N/A
Water
0
NEG
T
Fuel
N/A
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 7.00 - 16.00 hrs
Please call at least 24 hours before pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before January 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
