Enclosed Cab, A/C, Heater, Cummins Diesel Engine, Autoshift Transmission, 3rd Valve, 3000mm GP Bucket, 26.5 R 25 Tires, CE certificate available from seller - CE mark on machine
Meter Reading:
3,724 Hours
Serial Number:
Location:
Castilla y Leon, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Cracks; Surface rust in areas; Weld repairs
Steps/Ladders
See photos for condition; missing on right side
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Damaged mounting bracket; right side
Glass
See photos for condition; Front: Cracked; Left: Missing; Front: Damaged weather stripping; Left: Damaged weather stripping; Right: Damaged weather stripping; Rear: Damaged weather stripping; front is cracked and left door glass is missing
Seats/Armrests
Damaged armrest; Missing armrest
Seat Belts
Not equipped
Horn
Operational; Weak
Control Lock Lever
Loose
Hydraulic Controls
Damaged boots; Loose; Worn
3rd Valve
Equipped with a valve for an auxiliary attachment
Steering Controls
Loose
Drivetrain Controls
Loose
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes; Some inoperable; Some damaged; right front is cracked
Engine Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
3,724 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Cool but not cold; Vents damaged
Heater
Operational; Vents damaged
Limited Function Check
The main components operated except as noted.; door seals are damaged
3rd Valve
Engine
Make and Model
Cummins; LTA10-C engine; Serial #: 34806332; loose on belts
Fuel Type
Diesel
Emission Control Label
EC certification label
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational; Seepage; welds on connections
Fuel System
Operational
Exhaust System
Loose; Leaks at connections; Weld repair
Radiator
Oil Leaks
Seepage: Side of engine; Seepage on oil filters; See photos
Fuel Leaks
None seen; Seepage: Injection pump
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.; except as noted. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational; seepage, torque is ok
Transmission Disconnect
Operational
Front Drive Axle
Seepage
Rear Drive Axle
Seepage
Final Drives
Seepage; left front
Limited Function Check
The drivetrain was operational.; except as noted. See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Seepage
Valves
Hydraulic Tank
Low oil level
Hoses (Hydraulics)
Front Loader: Loose; Tractor: Loose; Front Loader: Worn; Tractor: Worn; Tractor: Seepage; Tractor: Braid Exposure; some weld-repair
Loader Lift Cylinders
Seepage on the left cylinder; Seepage on the right cylinder; Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Fluid accumulation on the center cylinder; Minor to moderate pin and bushing movement
Steering Cylinders
Seepage on the right cylinder; Dripping leak on the left cylinder; Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational except as noted.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Articulating Center Pins
Heavy movement
Steering Wheel Play
Minimal movement
Brake Type
Hydraulic
Master Cylinder
Brake Lines/Hoses
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Size
26.5 R 25 front tires; 26.5 R 25 rear tires; Front: Right: Michelin; Front: Left: Michelin; Rear: Right: Mesas; Rear: Left: Mesas
Tire Condition
Cuts; Gouges; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Lift Arm Condition
Chassis to Arm Pins
Heavy movement
Tilt Linkage Pins and Bushings
Excessive wear/damage; re-plated; Some pin seals missing
Bucket to Arm Pins
Heavy movement
Limited Function Check
The main components were operational except as noted.
Chassis #1
Specialty
Loader Bucket Condition
3000 mm General purpose loader bucket; Dented; Cracked; Weld repaired; Worn; plated and re-enforced
Loader Bucket Cutting Edge
Worn/damaged edge; Reversible-turned
Specialty #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jun 19, 2012
Jun 19, 2012
Silicon
13 PPM
55 PPM
Lead
8 PPM
4 PPM
Tin
1 PPM
4 PPM
Copper
12 PPM
347 PPM
Aluminum
5 PPM
12 PPM
Silver
N/A
N/A
Nickel
0 PPM
0 PPM
Chromium
4 PPM
0.7 PPM
Iron
30 PPM
103 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am - 4pm Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
