Scrapes; Dents; Surface rust in areas; Sheet metal erosion in areas; Sheet metal deteriorating in areas
Steps/Ladders
See photos for condition
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
Desilvering
Glass
The door is missing.
Seats/Armrests
Inoperable slide or adjustment
Seat Belts
Operational; Fraying
Horn
Inoperable
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
No
Warning Lights
Operational; The brake on light stays on when the brakes are released.
Travel Alarm
Inoperable
Gauges
The transmission temperature gauge is inoperable.
Hour Meter/Odometer
There is an hour meter replacement/change label that has the following reading on it: 8,740 hours; Digital hour meter: .1 hours; Inoperable
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Vents damaged; Inoperable
Limited Function Check
The spray controls are mislabeled. The main components operated except as noted.
Hour Meter/Odometer
Engine
Make and Model
Caterpillar 3208 engine; 8 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Fan shroud damage
Oil Leaks
There is fluid accumulation from an unknown source on the belly pan.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Front Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational. See oil report.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Serial Number
90 721
Capacity Of Tank
5,000 gallon tank
Tank Condition
Minor dents; Dripping leak
Tank Internal
Noticeable rust
Water Pump
Baffles
3
Valves
Spray Nozzles
2 spray nozzles
Hoses
None included with unit
Hitch Condition
Hitch Pin Condition
Minor to moderate movement
Limited Function Check
The main components functioned with minor wear throughout.
Steering Linkage
Minor to moderate movement
Articulating Center Pins
Minor to visible movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Surface Rust
Limited Function Check
The main components were operational except as noted.
Brake Type
Air over hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine. The brakes make unusual noise.
Tire Size
Size: 23.5-25; Brand(s): General
Tire Condition
Cuts
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hoses (Hydraulics)
Weathered
Cylinder(s)
Cylinder Pins and Bushings
Minor to moderate movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Oil Sample Analysis
Engine
Transmission
date of analysis
May 15, 2012
May 15, 2012
Silicon
4 PPM
17 PPM
Lead
0 PPM
16 PPM
Tin
0 PPM
2 PPM
Copper
3 PPM
120 PPM
Aluminum
0 PPM
9 PPM
Silver
0.1 PPM
0.3 PPM
Nickel
0.3 PPM
0.2 PPM
Chromium
0 PPM
0.1 PPM
Iron
3 PPM
38 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00 am - 4:00 pm; Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
This item may be subject to sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $7,500
10% of the final selling price
$7,500 to $31,800
3.85% of the final selling price (min $750)
Above $31,800
$1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
