Enclosed Cab, A/C, Heater, Deutz BF6M 1013 engine, Hydrostatic Drive, 500/60-22,5 Front Tires,No CE certificate available from seller - CE mark on machine,
Meter Reading:
443 Hours
Serial Number:
Location:
Kobenhavns, Denmark
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Surface rust; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Mark (on or near data plate)
Control Station
Mirrors
Glass
Front: Cracked
Seats/Armrests
See photos for condition
Seat Belts
Not equipped
Horn
Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Controls stick
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Hour Meter/Odometer
443 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational.
Hour Meter/Odometer
Engine
Make and Model
Deutz; BF6M 1013 engine; 6 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Rust penetration; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
See photos; Residue: Valve cover
Fuel Leaks
See photos
Cooling System Leaks
See photos
Limited Function Check
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Final Drives
Front Drive Axle
Rear Drive Axle
Drive Line
Limited Function Check
The drivetrain functioned without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Wet with residue
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulics)
Weathered
Auxiliary Hydraulic Plumbing
Not operationally checked
Cylinder(s)
Cylinder Pins and Bushings
Minimal movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minimal movement
Articulating Center Pins
Minimal movement
Steering Wheel Play
Minimal movement
Frame Condition
Rusty
Limited Function Check
The main chassis components were operational in a limited check.
Brake Type
Hydrostatic
Master Cylinder/Brake Control
Brake Lines/Hoses
Not operationally checked
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
500/60-22,5 Front tires; LF Trelleborg; All same brand
Tire Condition
Minor cuts and gouges; See photos
Tread Depth
LF 25/32"; RF 25/32"; LR 25/32"; RR 25/32"
Wheel Condition
Rusty
Wheel Studs
Feed Roll Housing
Feed Rollers
Cutterhead
Stationary Knife / Shear Bar
Belts and Pulleys
Drive Chains/Sprockets
See photos
Blower/Fan
Chassis #5
Oil Sample Analysis
Engine
date of analysis
Jun 01, 2011
Silicon
17 PPM
Lead
2 PPM
Tin
1 PPM
Copper
2 PPM
Aluminum
10 PPM
Silver
N/A
Nickel
1 PPM
Chromium
6 PPM
Iron
161 PPM
Glycol
0
Water
NEG
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 7:00am - 4:00pm
Call at least one day before arrive
Loading Dock NOT Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before November 16.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
