Stahl 9' Body, 1 Fuel Tank, 2 Product Tanks, 1 Waste Oil Tank, Grease Barrel, 4 Hose Reels, Venturo ET6KR Crane, 2,200 lbs. Max Lift Capacity, Miller Bobcat 225T Welder, Ingersoll Rand Air Compressor, A/C, Cruise Control, Power Windows, International A325 Engine, 325 Adv. Horsepower, Manual Transmission, 4x4, 165" Wheel Base, Spring Suspension, 17,500 GVWR. ***Please note important pickup requirements in the shipping tab below. ***
Mileage:
138,321 Miles
VIN:
Location:
Florida, United States
Zip/Postal Code:34689
(Tampa-St. Petersburg-Clearwater area)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Restriction:
Bidders from California:
You must be a Vehicle Dealer to purchase this vehicle in California.
Why?
I live in California and I am not a Vehicle Dealer. Why can't I purchase this item?
IronPlanet became a licensed vehicle dealer in the State of California to offer more services to our California customers, such as processing vehicle registrations at the CA Department of Motor Vehicle.
However, being a dealer means that any on-road item IronPlanet sells to our California retail customers (non-dealers) must meet the state's rigorous emission (smog), weight, VIN verification and safety requirements. IronPlanet cannot make these assurances on out-of-state vehicles. Therefore, we are required to make available to our retail California customers only those items that are already California-titled. In this way, IronPlanet can meet our legal requirement as a California Dealer and assure our California customers their purchases can be registered without issue in California.
Buyers outside California are not subject to these restrictions.
California Dealers can purchase out-of-state vehicles because they are buying the vehicle for resale and will by law be responsible for the smog, VIN etc. requirements when they make their subsequent sale to a California retail customer.
For more information, please call Customer Care at 888-433-5426.
Bidders from Canada:
Before bidding, please check with your Registrar of Imported Vehicles (RIV) regarding admissibility of this vehicle into Canada.
Why?
Certain vehicles from the United States are not admissible into Canada. The Registrar of Imported Vehicles (RIV) was created by Transport Canada to establish and maintain a system of registration, inspection and certification to Canadian standards of vehicles originally manufactured for distribution in the U.S. market that are being permanently imported into Canada. Please visit the RIV website at Registrar of Imported Vehicles - Before you import to learn more details and determine the admissibility of this item.
Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Surface rust in areas; See photos for condition
Steps/Ladders
No visible damage
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
No visible damage
Glass
No visible damage
Window Controls
Upholstery
Carpet: Worn; Headliner: Stains
Seats/armrests
Leather/vinyl seats; Torn
Seat Belts
Operational
Horn
Electric: Inoperable
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises. The gauge registers in the operating range.
Exterior Lights Operational
Yes; Some inoperable
Warning Lights
Operational
Gauges
Operational
Hour Meter/Odometer
138,321 Miles; Operational odometer
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Inoperable; Hole in metal tubing
Heater
Operational
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
US EPA certification label
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage; No exhaust leaks present at time of inspection, there is evidence on an exhaust leak under the hood
Radiator
Low coolant level; Added 1.5 Gal of coolant, I did not detect a leak
Oil Leaks
Fluid Accumulation: Side of engine; Fluid Accumulation: Rear of engine; Fluid Accumulation: Top of engine; Fluid Accumulation: Oil pan
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran with smoke that mostly cleared. The engine emitted a white vapor until the unit reached operating temperature. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational; Fluid accumulation at transmission and transfer case
Clutch
Engages
Drive Shaft
Front Drive Axle
Rear Drive Axle
Limited Function Check
The drivetrain was operational without a load.
Drivetrain #1
Hydraulics
Limited Function Check
The hydraulic system was not operationally checked.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Components
Fluid accumulation on steering cylinder
Brake Type
Hydraulic brakes
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Stopped the machine while rolling
Limited Function Check
The brake system functioned, stopping and holding the machine.
Left front: Michelin 13 /32"; Left rear outer: Sumitomo 18 /32"; Left rear inner: Sumitomo 18 /32"; Right rear outer: Sumitomo 18 /32"; Right rear inner: Sumitomo 19 /32"; Right front: Michelin 11 /32"
Tire Condition
See photos
Wheel Condition
Rusty
Wheel Studs
Bed Body
Minor dents; Surface rust; Weather stripping damaged
Air Compressor
Ingersoll-Rand; Not operationally checked; Gas Engine; The engine would not start
Welding Machine
Miller; Bobcat 225T; Gas engine; The engine would not start; Hour meter reading 204 hours
Crane
Venturo; ET6KR; 2,200 lb. Capacity; The crane could not be operationally checked; Missing control unit
Stabilizer Jacks
Number of jacks 2; Manual; The stabilizers could not be operationally checked
Tool/Storage Boxes
See photos; Doors will not seal
Product Tanks
2 Product Tanks; 1 Waste Oil Tank; 2 additional tanks under the front of the bed; Dent at tank mounted on underside rear of truck
Hose Reels
4 Hose Reels; Not operationally checked
Product Pumps
Air Pumps; Not operationally checked
Hoses
Not operationally checked
Grease Barrels
Not operationally checked; See photos; Hose; Gun
Storage Compartments
See photos
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jul 24, 2012
Silicon
11 PPM
Lead
6 PPM
Tin
2 PPM
Copper
3 PPM
Aluminum
7 PPM
Silver
0.1 PPM
Nickel
1.1 PPM
Chromium
0.4 PPM
Iron
37 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: Mon-Fri 8-3
Call 24 hours in advance. ***All items must be picked up within 8 days of the auction to avoid storage fees. Items not picked up within 20 days of the auction will be relocated at the buyer’s expense. ***
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
This item is subject to Florida sales tax unless you are a licensed vehicle dealer in the United States.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
A transferable title will be sent to the buyer by express mail or similar service within 15 business days of the auction. Buyer is responsible for vehicle registration.
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
