Day Cab, Heater, Scania Diesel Engine, 8 Speed Manual Transmission, PTO, Air Suspension, Palfinger PK12080K Crane, 11m Max Lift Height, Hydraulic Liftgate Ramp, 5000mm Wheel Base, Stabilizer Jacks, 315/80 R22.5 Tyres. No CE certificate available from seller - No CE mark on machine.
Meter Reading:
582,392 KM
Serial Number:
Location:
Pays de la Loire, France
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - No CE mark on machine
Paint
Not original paint; Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Cracks; Bent panels; See photos for condition
Steps/Ladders
See photos for condition; Minor Dents and Abrasions.
Hand Rails
No visible damage; See photos for condition
CE Certificate Available
Control Station
Mirrors
Cracked; Broken; On the Drivers Side.
Seats/armrests
Cloth seats; Burn holes
Seat Belts
Operational
Horn
Electric: Operational
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Gauges
Operational
Odometer Reading
582,392 km
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check
The main components are in place and operational.
Odometer Reading
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Air Compressor
Operational
Turbo or Blower
Operational
Injection Pump
Operational
Exhaust System
See photos for condition; Rusty Flange on Pipe to Silencer
Radiator
Oil Leaks
Seepage: Valve cover; Bottom of Bell Housing
Cooling System Leaks
None seen; See photos
Limited Function Check
After jump starting the engine ran.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Leaks
None Seen
Clutch
Engages
Drive Shaft
Power Take Off
Operational
Rear Drive Axle
Limited Function Check
The drivetrain was operational without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Fluid accumulation; winch.
Valves
Sticking; Due to Lack of usage.
Hydraulic Tank
Hoses (Hydraulics)
Weathered; Chafed
Cylinder(s)
Rod chrome damage; Fluid accumulation; On Ramp Cylinder
Cylinder Pins and Bushings
Minimal movement
Limited Function Check
The hydraulic system was operational except as noted.; The Winch could not be operated as the cable was jammed.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minimal movement
Master Cylinder/Brake Control
Low pedal
Brake Lines/Hoses
Cracked/chafed
Park Brake
Stopped the machine while rolling
Limited Function Check
The brake system functioned, stopping and holding the machine.; The brakes make unusual noise due to the lack of usage (See Photos of Discs).
Springs/Hangers Condition
Suspension Air Bags
Suspension Bushings
Cracks
Cab Suspension Linkage
Frame Condition
Surface Rust
Tire Size
315/80 R22.5 Front tires; LF Hankook; LR Michelin ; RR Michelin ; RF Hankook
Palfinger PK12080K ; Hydraulic operated; The crane extends and is operational
Stabilizer Jacks
Number of jacks 2; Hydraulic; Manual; Pull Out
Tool/Storage Boxes
See photos; Damaged latches; Doors will not seal
Chassis #1
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9.00 - 12.00; 14.00 - 18.00 hrs - please call at least 24 hours in advance
Please check loading facilities' suitability directly with seller; call at least 24 hrs in advance
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
