Blemishes where decals have been removed; Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; Dents; Surface rust in areas; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
Glass
The left and front glass are cracked.
Window Controls
Both Manual
Seats/armrests
Seat Belts
Operational
Horn (Truck)
Air: Operational
Oil Pressure
The gauge registers in the operating range.
Exterior Lights Operational
No
Gauges
Operational
Max. Air Pressure Reading
120 psi
Odometer Reading
4,255 miles; The vehicle was not driven far enough to determine the functionality of the odometer.
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Hour Meter
645 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Odometer Reading
Engine
Fuel Type
Diesel
Emission Control Label
None found
Block Heater
No
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Air Compressor
Operational
Injection Pump
Operational
Exhaust System
No visible damage
Radiator
Minor plugging of fins
Oil Leaks
There is a dripping leak at the power steering pump.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran with a miss, noise and smoke that did not clear. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Leaks
Fluid accumulation
Clutch
Engages
Drive Shaft
Front Drive Axle
Center Drive Axle
Rear Drive Axle
Limited Function Check (DT Vehicles)
The drivetrain was operational without a load.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Brake Type
Air over hydraulic brakes
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Weak
Limited Function Check
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Rusty
Suspension Bushings
Minor cracks
External Electrical / Air Connections
Not operationally checked
Fifth Wheel
Fixed 5th wheel
Wheel Base: (Front axle to center of rear tandems)
166"
Axle Capacities
10,513 lb. Capacity Front Axle; 30,672 lb. Capacity Rear Axles, 41,185 lb. Total Capacity
Frame Condition
Surface Rust
Tire Size
11.00-20 Tires; Brand(s): Fidelity, Titan & NDT
Tire Condition
Cuts; Cracks; Gouges
Tread Depth
3/32-17/32"
Wheel Condition
Wheel Studs
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jun 01, 2012
Silicon
2 PPM
Lead
1 PPM
Tin
2 PPM
Copper
1 PPM
Aluminum
3 PPM
Silver
0.1 PPM
Nickel
0.2 PPM
Chromium
0.9 PPM
Iron
17 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 3pm, Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 5.
This item is subject to Nevada sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
