No CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition
Dents; Cracks; Weld repairs; Bent panels; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
Seats/Armrests
Torn cover; Aftermarket seat cover; Missing armrest; Damaged armrest; See photos for condition
Seat Belts
Not equipped
Horn
Operational
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes; Some inoperable
Engine Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Operational
Hour Meter/Odometer
27,020 Hours; Operational hour meter; 1391,30 Kilometers; Operational odometer
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Rust penetration; Weld repair; See photos for condition
Radiator
Oil Leaks
See photos; Fluid Accumulation: Valve cover; Fluid Accumulation: Oil Pan; Oil leaks on the turbo
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran.; Batteries are in bad condition. SEE OIL REPORT.
Engine #1
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Center Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cracked
Dump Body Cylinders
Minor to moderate pin and bushing movement
Steering Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.SEE OIL REPORT.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Articulating Center Pins
Minor to visible movement
Oscillating Hitch Wear
Minor to visible movement
Frame Condition
Cracked; Weld repair
Suspension Cylinders
Suspension Trunnions
Minor wear; Left side rubbers are worn out
Limited Function Check
The main chassis components functioned during a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Unable to test with slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Condition
See photos; Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Bed Body
Minor dents; Cracks; Weld repairs; Repair plating; Body mounting has cracked
Bed Pads
Damaged; Weld repairs
Hinge Points
Minor to moderate movement
Limited Function Check
The main chassis components were operational in a limited check.
Chassis #1
Oil Sample Analysis
engine
hydraulic
date of analysis
Jul 13, 2012
Jul 13, 2012
Silver
N/A
N/A
Water
0
0
Aluminum
4 PPM
0 PPM
Chromium
1 PPM
0 PPM
Nickel
0 PPM
0 PPM
Copper
2 PPM
1 PPM
Iron
17 PPM
4 PPM
Silicon
6 PPM
1 PPM
Glycol
0
0
Tin
1 PPM
0 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8.00-16.00
.
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 20.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
