Back to Search Results / Sterling Industrial Pressure Drill on 1986 International 1854 S/A Truck
 

Sterling Industrial Pressure Drill on 1986 International 1854 S/A Truck (#389780)

Search for other Trucks - Utility items

Winning Bid: US $12,600  
# of Bids: 74
Sold on: : 8/2/12
Auction Type: Featured Auction
SOLD!
Features: Over Rear Axle Mount, Sterling Industrial Boom, Cummins 4BT-3.9 Drill Engine, Non-Insulated, Flat Bed, International DT466 Engine, Automatic Transmission, 171" Wheel Base, 11R22.5 Tires
Mileage: Meter Broken
VIN:
Location: Florida, United States
Zip/Postal Code:33917
(Fort Myers-Cape Coral area)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Restriction: Bidders from California:   You must be a Vehicle Dealer to purchase this vehicle in California. Why?
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
Safety Certification Label There was no safety certification label located on the machine.
Safety Certification Report Safety Certification Report Not Available - IronPlanet in no way guarantees the validity or accuracy of any safety related documents or labels associated with this item. We strongly recommend a safety inspection is performed before using this item.
Load Chart Yes
CE Mark (on or near data plate) No
Paint Scratches; Chips; See photos for condition
Sheet Metal (fiberglass) Condition Scrapes; Cracks; Surface rust in areas; See photos for condition
Steps/Ladders See photos for condition; Some missing
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors No visible damage
Glass No visible damage
Window Controls Both Manual
Seats/armrests Vinyl seats; Torn
Seat Belts Not equipped
Horn Electric: Inoperable
Oil Pressure The gauge registers in the operating range.
Exterior Lights Operational No
Warning Lights Inoperable
Travel Alarm Inoperable
Gauges Some gauges inoperable; Inoperable gauges: Fuel gauge
Max. Air Pressure Reading 120 psi
Odometer Reading Inoperable; 76,091 miles - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Inoperable
Limited Function Check (cs) The main components operated except as noted.
Odometer Reading
 
Engine
Fuel Type Diesel
Horsepower Rating 7.6L displacement
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Significant
Starter Operational
Air Compressor - Truck Operational
Turbo or Blower Operational
Injection Pump Operational
Exhaust System No visible damage
Radiator Minor plugging of fins
Oil Leaks There is fluid accumulation on the valve cover, oil pan, and the side of the engine.
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational
Transmission Leaks Fluid accumulation
Drive Shaft
Front Drive Axle Fluid Accumulation
Rear Drive Axle Fluid Accumulation
Limited Function Check The drivetrain was operational without a load. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Not operationally checked
Valves Not operationally checked
Hydraulic Tank Damaged; Dented
Hoses (Hydraulic)
Swing Motor Not operationally checked
Main Hoist Not operationally checked
Boom Lift Cylinder(s) Not operationally checked
Stabilizer Cylinders Not operationally checked
Limited Function Check The rear engine could not be started, and the hydraulic system was not operationally checked.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage Minor to moderate movement
Steering Wheel Play Minor to moderate movement
Brake Type Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Frame Condition
Tire Size 11R22.5 Tires; Brands: Goodyear, Cooper, and Kumho
Tire Condition See photos
Tread Depth LF 17 /32"; LRI 19 /32"; LRO 19 /32"; RRI 17 /32"; RRO 17 /32"; RF 14 /32"
Wheel Condition
Wheel Studs
Turn-table Bearing Not operationally checked
Boom Condition Not operationally checked
Engine Cummins 4BT-3.9 Engine; There is not key to the engine. The engine was not started.
Chassis #1
 
Boom Controls
Hand Rails See photos for condition
Control Console Labels missing or hard to read
Hydraulic Controls Not operationally checked
Gauges Not operationally checked
Limited Function Check (cs) Some components could not be operationally checked.
Boom Controls #1
Oil Sample Analysis Engine Transmission
date of analysis May 30, 2012 May 30, 2012
Silicon 0 PPM 5 PPM
Lead 2 PPM 4 PPM
Tin 0 PPM 0 PPM
Copper 18 PPM 307 PPM
Aluminum 1 PPM 3 PPM
Silver 0.3 PPM 0.6 PPM
Nickel 0.2 PPM 0.2 PPM
Chromium 0.6 PPM 0.1 PPM
Iron 16 PPM 33 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.