Enclosed Cab, A/C, Heater, Iveco -, Cusor 13 Engine, 450 Adv. Horsepower, Engine Brake, 12 Speed, Automatic Transmission, Spring Suspension, 8000kg Capacity Front Axle, 8000kg Capacity Rear Axle, 21000kg Capacity Rear Axles, 32000kg GVWR, No CE certificate available from seller - CE mark on machine,
Meter Reading:
102,013 KM
Serial Number:
Location:
Vetsjaelland, Denmark
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Truck fully tested and first registered in Denmark 2012.
General Appearance
CE Certificate Available
No CE certificate available from seller - CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Surface rust in areas; See photos for condition
Steps/Ladders
No visible damage; See photos for condition
Hand Rails
No visible damage; See photos for condition
General Appearance #1
Control Station
Mirrors
No visible damage
Glass
No visible damage
Window Controls
Both Power
Upholstery
Seats/armrests
Cloth seats
Seat Belts
Operational
Horn (Truck)
Electric: Operational
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Engine Warning Lights
Operational
Gauges
Operational
Odometer Reading
102013 km; Functional
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational.
Odometer Reading
Engine
Fuel Type
Diesel
Horsepower Rating
450 rated horsepower; 13l. displacement
Emission Control Label
None found
Block Heater
No
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Air Compressor
Operational
Turbo or Blower
Operational
Injection Pump
Operational
Exhaust System
No visible damage; See photos for condition
Radiator
Oil Leaks
None seen; See photos
Fuel Leaks
None seen; See photos
Cooling System Leaks
None seen; See photos
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Leaks
None Seen
Drive Shaft
Power Take Off
Operational
Rear Drive Axle
Limited Function Check (DT Vehicles)
The drivetrain was operational without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Cylinder(s)
Cylinder Pins and Bushings
Minimal movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minimal movement
Brake Type
Air over hydraulic brakes
Master Cylinder/Brake Control
Brake Lines/Hoses
Not operationally checked
Park Brake
Held against power
Limited Function Check
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Suspension Bushings
Cab Suspension Linkage
Frame Condition
Surface Rust
Tire Size
315/8-R22,5 Front tires; 315/80R22,5 Rear tires; LF Conti+Good; LR Good+Good; RR Continental; RF Pirelli
The main chassis components were operational in a limited check.
Chassis #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jun 19, 2012
Jun 19, 2012
Silicon
2 PPM
31 PPM
Lead
0 PPM
0 PPM
Tin
0 PPM
0 PPM
Copper
0 PPM
0 PPM
Aluminum
0 PPM
10 PPM
Silver
N/A
N/A
Nickel
0 PPM
0 PPM
Chromium
0 PPM
0 PPM
Iron
2 PPM
47 PPM
Glycol
0
N/A
Water
0
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 7am to 4pm
You must call at least 24 hours in advance to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
