Day Cab, Mercedes Engine, 230KW Rated Horsepower, 16F/2R Speed Transmission, 315/80 R 22.5 Tires, 7500. Capacity Front Axle, 7500. Capacity Rear Axle, 9500. Capacity Rear Axles, Multitel Boom, 250KG. Capacity, 46 M Max Lift Height, CE certificate available from seller - CE mark on machine,
Meter Reading:
See Report
Serial Number:
Location:
Lombardia, Italy
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
No visible damage
Glass
No visible damage
Window Controls
Left Manual / Right Power
Seats/armrests
Cloth seats; Torn
Seat Belts
Operational
Horn (Truck)
Air: Operational
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Warning Lights
Operational
Gauges
Operational
Odometer Reading
285073 km
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Hour Meter /Odometer Reading
Platform 4107 hrs, Aux Engine 5436 hrs
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check
The main components are in place and operational.
Odometer Reading
Engine
Make and Model
Mercedes; 6 Cylinder Engine
Fuel Type
Diesel
Horsepower Rating
230Kw rated horsepower
Exhaust Brake
Yes
Emission Control Label
None found
Block Heater
Yes
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Air Compressor
Turbo or Blower
Operational
Injection Pump
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Functions but could not verify shifting in all ranges
Transmission Leaks
None Seen
Drive Shaft
Front Drive Axle
Center Drive Axle
Fluid Accumulation
Rear Drive Axle
Fluid Accumulation
Limited Function Check (DT Vehicles)
Due to the confined area at the seller's location a complete check of all speeds could not be completed. The drivetrain was operational when checked without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Boom Extension Cylinder
Minor to visible pin and bushing movement
Stabilizer Cylinders
Seepage on the left cylinder; Rust pitting in the chrome on the left cylinder
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Steering Linkage
Minor to moderate movement
Steering Wheel Play
Minor to moderate movement
Brake Type
Air
Brake Lines/Hoses
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Frame Condition
Tire Size
All 315/80-R22.5 and Bridgestone
Tire Condition
See photos
Wheel Condition
Wheel Studs
Turn-table Bearing
Performs within tolerance expected for age and hours
Boom Condition
Boom Wear Guides
Cable Tray Ladder
Stabilizer Beams
Stabilizer Controls
Work Basket
Cracks at arm connection
Chassis #1
Boom Controls
Hand Rails
See photos for condition
Control Console
Hydraulic Controls
Boom Controls #1
Oil Sample Analysis
Engine
date of analysis
Sep 02, 2012
Silicon
19 PPM
Lead
0 PPM
Tin
0 PPM
Copper
2 PPM
Aluminum
2 PPM
Silver
N/A
Nickel
0 PPM
Chromium
0 PPM
Iron
12 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-12:00 and 14-17hs -Call at least one day before arrive
Please check loading facilities' suitability directly with seller
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 3.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
