Scrapes; Dents; Surface rust in areas; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
The right mirror is broken.
Glass
See photos for condition; The left door is missing. The front and left glass are missing.
Seats/Armrests
Torn cover; Missing armrest; Inoperable slide or adjustment; Damaged cushion; See photos for condition
Seat Belts
Inoperable retract
Horn
Inoperable
Hydraulic Controls
Damaged boots
Steering Control
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Warning Lights
Operational
Travel Alarm
Missing
Gauges
Operational
Hour Meter/Odometer
3,328 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check (cs)
The main components operated except as noted. There is a non OEM ignition switch.
Hour Meter/Odometer
Engine
Make and Model
Perkins 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage; See photos for condition
Radiator
Oil Leaks
There is fluid accumulation on the valve cover.
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran; See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Height
6,000 lb. max lift capacity; 36' lift height
Boom Condition
Chain / Tensioners
Rollers and Guides
Boom Wear Guides
Load Back Rest
Bent
Forks
47" Forks
Frame Leveling
Yes
Mast Condition
Steering Linkage
Minor to moderate movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydraulic
Master Cylinder
Soft pedal
Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
15.5x25 Tires; Brands: Primex and Duramax
Tire Condition
See photos; Cuts
Wheel Condition
Rust
Wheel Studs, Nuts, Lugs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Boom Lift Cylinder(s)
Leak at the left cylinder
Telescope Boom Cylinders
Fork Tilt Cylinders
Fluid accumulation; Minor to moderate pin and bushing movement; Seepage at carriage tilt cylinder
Steering Cylinders
Leaks; Minor to moderate pin and bushing movement; There are brackets mounted on steering cylinders
Limited Function Check
The hydraulic system was operational without a load; See oil report.
Hydraulics #1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jun 06, 2012
Jun 06, 2012
Silicon
12 PPM
7 PPM
Lead
3 PPM
4 PPM
Tin
0 PPM
1 PPM
Copper
10 PPM
6 PPM
Aluminum
12 PPM
3 PPM
Silver
0.2 PPM
0.1 PPM
Nickel
0.8 PPM
0 PPM
Chromium
4.8 PPM
0.3 PPM
Iron
143 PPM
8 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: Monday - Friday 7:00-4:00
Must call IronPlanet Pickup Support
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 26.
This item is subject to Mississippi sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
