Enclosed Cab, Perkins Diesel Engine, Aux. Hyd. Plumbing, 4x4 w/ 3 Way Steering, 4200Kg Max Weight Capacity, 15m Max Lift Height, 1200mm Forks, 18-22.5 Tyres. CE certificate available from seller - CE mark on machine.
Meter Reading:
2,016 Hours
Serial Number:
Location:
Emilia-Romagna, Italy
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
Scratches; See photos for condition
Sheet Metal (fiberglass) Condition
Dents; See photos for condition
Steps/Ladders
No visible damage; See photos for condition
Hand Rails
No visible damage; See photos for condition
CE Certificate Available
Control Station
Mirrors
No visible damage
Glass
No visible damage
Seats/Armrests
Seat Belts
Operational
Horn
Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Engine Warning Lights
Operational
Gauges
Operational
Hour Meter/Odometer
2,016 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Make and Model
Perkins ; 2166/2200 engine; 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Transmission Disconnect
Operational
Drive Motors
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Height
4200Kg lb. max lift capacity; 15m lift height
Boom Condition
Chain / Tensioners
Boom Wear Guides
Turn-table Bearing
Performs within tolerance expected for age and hours; Moderate wear
Forks
1200mm forks (Currently Off Machine)
Outriggers
Worn Guides
Frame Leveling
No
Steering Linkage
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydrostatic
Brake Control
Brake Lines/Hoses
Park Brake
Held on slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
The hydraulic system was operational without a load.
Hydraulics #1
Oil Sample Analysis
Engine
date of analysis
Jun 01, 2012
Silicon
5 PPM
Lead
0 PPM
Tin
0 PPM
Copper
28 PPM
Aluminum
0 PPM
Silver
N/A
Nickel
0 PPM
Chromium
0 PPM
Iron
9 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-12 and 14-16:30hs - Call at least 24hs in advance
Please check loading facilities' suitability directly with seller
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
