Enclosed Cab, Heater, Deutz Diesel Engine, Aux. Hyd. Plumbing, 4x4 w/ 3 Way Steering, 5000Kg Max Weight Capacity, 10m Max Lift Height, Frame Leveling, 1200mm Forks, 400/70R20 Michelin Power CL Tyres. No CE certificate available from seller - CE mark on machine,
Meter Reading:
5,422 Hours
Serial Number:
Location:
Catalonia, Spain
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Disconnect
Operational
Drive Motors
Fluid Accumulation
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Height
5000Kg max lift capacity; 10m lift height
Boom Condition
Chain / Tensioners
No access
Boom Wear Guides
Load Back Rest
Turn-table Bearing
Minor to moderate movement
Forks
1200mm forks
Outriggers
Frame Leveling
Yes
Steering Linkage
Minor to moderate movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Unable to test with slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
400/70R20 front tires; 400/70R20 rear tires; All Michelin Power CL Brand.
Tire Condition
See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Fluid accumulation
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational
Boom Lift Cylinder(s)
Fluid accumulation on the left cylinder; Fluid accumulation on the right cylinder; Minor to moderate pin and bushing movement
Telescope Boom Cylinders
Seepage
Fork Tilt Cylinders
Steering Cylinders
Minor to moderate pin and bushing movement
Swing Motor
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Oil Sample Analysis
engine
date of analysis
May 20, 2012
Silver
N/A
Water
0
Aluminum
2 PPM
Chromium
0.5 PPM
Nickel
0 PPM
Copper
1 PPM
Iron
14 PPM
Silicon
16 PPM
Glycol
0
Tin
1 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9-13hs and 15-19hs
Please check loading facilities' suitability directly with seller
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 26.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €5,000
10% of the final selling price
€5,000 to €31,800
3.85% of the final selling price (min €500)
Above €31,800
€1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
