Enclosed Cab, Heater, Deutz Diesel Engine, Aux. Hyd. Plumbing, 4x4 w/ 3 Way Steering, 4500Kg Max Lift Capacity, 21m Max Lift Height, Frame Leveling, 1200mm Forks, 445/65R22.5 Tyres. CE certificate available from seller - CE mark on machine.
Meter Reading:
2,077 Hours
Serial Number:
Location:
Lombardia, Italy
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
CE certificate available from seller - CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Scrapes; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
Seats/Armrests
Seat Belts
Operational
Horn
Operational
Control Lock Lever
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes
Warning Lights
Operational
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
2,077 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check (cs)
The main components are in place and operational.
Hour Meter/Odometer (Start)
Engine
Make and Model
Deutz ; 4M2012C engine; 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
EC certification label
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
See photos for condition
Radiator
Oil Leaks
See photos; Pan Damage
Fuel Leaks
See photos
Cooling System Leaks
See photos
Limited Function Check (Engine)
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Disconnect
Operational
Drive Motors
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Height
4500Kg max lift capacity; 21m lift height
Boom Condition
Chain / Tensioners
Rollers and Guides
Moderate wear
Boom Wear Guides
Turn-table Bearing
Minor to moderate movement
Forks
1200mm forks (In Work Basket)
Outriggers
Frame Leveling
Yes
Steering Linkage
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydraulic
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
445/65R22.5 front tires; 445/65R22.5 rear tires; All Mitas Brand Tires.
Tire Condition
See photos; Plugs
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked; The Hydraulics to the Basket do not work.
Boom Lift Cylinder(s)
Telescopic Boom Cylinders
Fork Tilt Cylinders
Steering Cylinders
Swing Motor
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Additional Photos
Work Basket
Included with machine
Photo #1
Oil Sample Analysis
Engine
date of analysis
May 20, 2012
Silicon
19 PPM
Lead
13 PPM
Tin
6 PPM
Copper
18 PPM
Aluminum
6 PPM
Silver
N/A
Nickel
0 PPM
Chromium
3.8 PPM
Iron
66 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8-12 and 14:30-17hs - Please call at least before 24hs in advance
Please check loading facilities' suitability directly with seller
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 30.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
