Not original paint; Touch up paint; Scratches; Chips; See photos for condition; Minor concrete residue
Sheet Metal (Fiberglass) Condition
Minor dents/scratches; See photos for condition; Minor cracks; engine hood handle is bent; plastic cover behind the cab is bent and damaged
Steps/Ladders
No visible damage
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
Glass
Seats/Armrests
Torn cover; Damaged cushion; Damaged armrest; See photos for condition
Seat Belts
Operational
Horn
Operational
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The gauge registers in the operating range; 60 PSI
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
2,801 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check (cs)
The main components operated except as noted. There is light overspray and scratches on the dash and cab. There are screws missing from the dash. The plastic cover over the hour meter has been damaged and is missing.
Hour Meter/Odometer
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Leaks at connections; See photos for condition
Radiator
Minor plugging of fins
Oil Leaks
There is minor fluid accumulation on the side of the engine and the oil pan.
Fuel Leaks
There appears to be fluid and dirt accumulation at the back of the engine at the fuel transfer pump.
Cooling System Leaks
None seen
Limited Function Check (Engine)
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Front Drive Axle
Fluid and dirt accumulation
Front Axle Oscillating Pin Wear
Moderate movement
Rear Drive Axle
Fluid and dirt accumulation
Rear Axle Oscillating Pin Wear
Moderate movement
Final Drives
Limited Function Check
The drivetrain was operational.See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Not visually inspected
Hydraulic Tank
Fluid accumulation
Hoses (Hydraulics)
Minor weathering/cracking
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Telescope Boom Cylinders
Not visible
Fork Tilt Cylinders
Minor to moderate pin and bushing movement
Carriage Tilt Cylinder
Minor to moderate pin and bushing movement
Frame Leveling Cylinders
Minor to moderate pin and bushing movement
Fork Positioning Cylinder (on fork carriage)
Minimal pin and bushing movement
Steering Cylinders
Moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Chain / Tensioners
Rollers and Guides
Boom Wear Guides
Load Back Rest
Slightly bent
Forks
Slightly bent
Steering Linkage
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Control
Brake Lines/Hoses
Park Brake
Stopped from a slow roll
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Brands
Brand: EZ Load Super HD
Tire Condition
See photos; Solid/Cushion
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jul 03, 2012
Jul 03, 2012
Silicon
4 PPM
15 PPM
Lead
1 PPM
1 PPM
Tin
0 PPM
0 PPM
Copper
1 PPM
323 PPM
Aluminum
0 PPM
6 PPM
Silver
0.1 PPM
0.5 PPM
Nickel
0.1 PPM
0.1 PPM
Chromium
0.1 PPM
0.2 PPM
Iron
2 PPM
25 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
<5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00am-4:00pm Monday -Friday
Please call at least 24 hours in advance to schedule pick-up
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 24.
This item is subject to Mississippi sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
