Back to Search Results / 2005 JCB 520 Telehandler
 

2005 JCB 520 Telehandler (#405140)

Search for other Telehandlers items

Winning Bid: US $14,500  
# of Bids: 13   View Bid History
Sold on: : 8/9/12
Auction Type: Featured Auction
SOLD!
Features: 4,400 lb. Max Weight Capacity, 16' Max Lift Height, 42" Forks, Auxiliary Hydraulic Plumbing, Perkins 2160/2200 Engine, 4x4, Open Operator Station, 15.0/55-17 Tires
Meter Reading: 1,916 Hours
Serial Number:
Location: Florida, United States
Zip/Postal Code:33431-7949
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition Dents/scratches; Cracks; Surface rust; Some of the hydraulic line covers are bent. The front screen on the cab is bent/damaged. The fender is cracked. The back grille is dented and the latches are are damaged; See photos for condition
Steps/Ladders See photos for condition; Bent
Hand Rails No visible damage
General Appearance #1
 
Control Station
Mirrors No visible damage
Glass See photos for condition; No glass on the rear.
Seats/Armrests Inoperable slide or adjustment; See photos for condition
Seat Belts Operational; Does not retract all the way.
Horn Operational; After market horn.
Hydraulic Controls Worn
Steering Controls
Drivetrain Controls
Transmission Disconnect Control
Load Charts Posted on cab wall
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes
Engine Warning Lights Operational
Travel Alarm Operational
Gauges Operational; Difficult to read
Hour Meter/Odometer 1,916 Hours; Operational hour meter; Hour meter difficult to read - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check The main components operated except as noted. There is a missing dash cover.
Hour Meter/Odometer
 
Engine
Fuel Type Diesel
Emission Control Label US EPA certification label
Blow by @ idle (subjective observation) Minor
Starter Operational
Fuel System Operational
Exhaust System Weld repair; See photos for condition
Radiator
Oil Leaks None seen
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting; The unit does not appear to be charging. There is some wiring that has heavy rust on the terminals. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Operational; Seepage
Front Drive Axle Fluid Accumulation
Rear Drive Axle Fluid Accumulation
Final Drives
Limited Function Check The drivetrain was operational.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics) Fluid accumulation
Valves Fluid accumulation
Hydraulic Tank
Hoses (Hydraulics) On Machine: Damage; Worn; Hoses on mast: Worn; Hoses on machine: Worn; Hoses on mast: Braid exposure; Hoses on machine: Braid exposure; Some hold down brackets are bent. There are some steel lines bent.
Auxiliary Hydraulic Plumbing Not operationally checked; Front
Boom Lift Cylinder(s) Minor to moderate pin and bushing movement; Fluid seepage on the smaller boom cylinder.
Telescope Boom Cylinders Not visible
Fork Tilt Cylinders Minor to moderate pin and bushing movement; Chrome damage on the cylinder.
Steering Cylinders Seepage on the rear steering cylinder. Visible pin and bushing movement.
Limited Function Check The hydraulic system was operational except as noted. See oil report.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition Rusty
Chain / Tensioners Not visible
Rollers and Guides Worn guides
Boom Wear Guides Worn.
Load Back Rest
Forks Worn; There is a grinder mark on the left fork.
Steering Linkage Visible movement.
Frame Condition
Limited Function Check The main chassis components functioned during a limited check.
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake Unable to test with slope; The switch cover is damaged. The switch does work. The park brake did not stop the unit from a roll.
Limited Function Check The service brakes performed. The park brake would not hold the machine.
Tire Brands Continental
Tire Condition See photos; Cuts; Worn; Plugs; Gouges; The left front and right rear tires have been mounted with the directional tread backwards.
Wheel Condition Rusty; Dents
Wheel Studs, Nuts, Lugs
Chassis #1
Oil Sample Analysis Engine Hydraulic
date of analysis Jul 31, 2012 Jul 31, 2012
Silicon 3 PPM 4 PPM
Lead 1 PPM 7 PPM
Tin 0 PPM 0 PPM
Copper 2 PPM 21 PPM
Aluminum 1 PPM 1 PPM
Silver 0.2 PPM 0.1 PPM
Nickel 0.5 PPM 0 PPM
Chromium 0.2 PPM 0.8 PPM
Iron 5 PPM 30 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.