Enclosed Cab, Heater, Perkins Diesel Engine, Aux. Hyd. Plumbing, 4x4 w/3 Way Steering, 3000Kg Max Weight Capacity, 13m Max Lift Height, Front Stabilisers, 1300mm Forks, 15.5R25 Michelin Tyres. No CE certificate available from seller - CE mark on machine.
Meter Reading:
2,913 Hours
Serial Number:
Location:
Ile-de-France, France
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
See photos for condition
Sheet Metal (fiberglass) Condition
Minor dents; Scrapes; Dents; Cracks; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Certificate Available
Control Station
Mirrors
Loose
Glass
Seats/Armrests
Torn cover; Damaged cushion; See photos for condition
Horn
Operational
Hydraulic Controls
Steering Control
Drivetrain Controls
Foot pedal sticks
Oil Pressure
The oil pressure light does not illuminate on ignition.
Exterior Lights Operational
Yes
Warning Lights
Operational
Travel Alarm
Operational
Gauges
Operational
Hour Meter/Odometer
2,913 Hours; Operational hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check (cs)
The main components operated except as noted.
Hour Meter/Odometer (Start)
Engine
Make and Model
Perkins; 3PKXL03.9AK1 engine; Serial #: 178-9011
Fuel Type
Diesel
Emission Control Label
Both EC & EPA certification label
Blow by @ idle (subjective observation)
Minor
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
See photos for condition
Radiator
Fin damage
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Ograniczona kontrola funkcji
The engine started and ran. See oil report.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Clutch
Engages
Drive Motors
Front Drive Axle
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Lift Height
3000Kg max lift capacity; 13m lift height
Boom Condition
Chain / Tensioners
Rollers and Guides
Moderate wear
Boom Wear Guides
Second section boom guides
Load Back Rest
Bent
Forks
1300mm Forks
Outriggers
Frame Leveling
Yes
Mast Condition
Steering Linkage
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydraulic
Master Cylinder
Brake Control
Park Brake
Held on slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Size
15.5R25 front tires; 15.5R25 rear tires; - All Michelin Brand Tyres.
Tire Condition
See photos; Cuts; Gouges
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Boom Lift Cylinder(s)
Minor to moderate pin and bushing movement
Telescope Boom Cylinders
Not visible
Fork Tilt Cylinders
Minor to moderate pin and bushing movement
Steering Cylinders
Rust pitting in the chrome on the right cylinder; Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Oil Sample Analysis
Engine
date of analysis
Jun 10, 2012
Silicon
12 PPM
Lead
8 PPM
Tin
0 PPM
Copper
8 PPM
Aluminum
6 PPM
Silver
N/A
Nickel
0 PPM
Chromium
1.5 PPM
Iron
36 PPM
Glycol
0
Water
0
Fuel
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 12pm; 2pm to 5pm
You must call at least 24 hours in advance to schedule pickup
Loading Dock Available
Ramps Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before July 2.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
