Open Operator Station,Heater, Perkins Diesel Engine, 2410mm Bucket, Frame Leveling, Auxiliary Hydraulic Plumbing, 4x4 w/ 3 Way Steering, **PLease See Export Requirements Below** No CE certificate available from seller - CE mark on machine,
Meter Reading:
10,875 Hours
Serial Number:
Location:
DOHA, Qatar
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Minor dents; Cracks; Fenders are loose and replaced with sheet metal
Steps/Ladders
No visible damage
Hand Rails
No visible damage
CE Mark (on or near data plate)
Control Station
Mirrors
Glass
Roof glass missing
Seats/Armrests
Damaged armrest
Seat Belts
Operational
Horn
Inoperable
Hydraulic Controls
Buttons are worn
Steering Control
Drivetrain Controls
Cable is discounted from hand brake lever
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Yes; Some missing
Warning Lights
Engine warning light lights stay on
Travel Alarm
Inoperable
Hour Meter/Odometer
10,876 Hours
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Inoperable
Limited Function Check (cs)
The main components operated except as noted.; Bottom door glass missing, The left hand side of the control dash has been replaced by a steel cover, Load meter inoperable, Coolant leak in Cab
Hour Meter/Odometer
Engine
Make and Model
Perkins; Serial #: 1935/2200; 4 Cylinder Engine
Fuel Type
Diesel
Emission Control Label
Both EPA and EC certification
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
Fluid Accumulation: Valve cover; Fluid Accumulation: Oil Pan
Fuel Leaks
None seen
Cooling System Leaks
None seen; Coolant leak in cab
Limited Function Check (Engine)
The engine started and ran.
Emission Control Label
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission
Operational
Transmission Disconnect
Inoperable
Front Drive Axle
Rear Drive Axle
Evidance of repair carried out with sealant on joints
Final Drives
Noise when braking
Limited Function Check
The drivetrain was operational.
Drivetrain #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Boom Condition
Boom Wear Guides
Worn thin
Forks
2410mm Bucket
Outriggers
Excessive wear
Frame Leveling
Yes
Steering Linkage
Heavy movement
Steering Wheel Play
Minor to moderate movement
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Brake Type
Hydraulic
Master Cylinder
Brake Control
Noisey and jumpy
Park Brake
Inoperable
Limited Function Check
The service brakes performed. The park brake would not hold the machine.
Hoses on mast: Worn; Hoses on machine: Worn; Hoses on machine: Braid exposure
Auxiliary Hydraulic Plumbing
Not operationally checked
Boom Lift Cylinder(s)
Telescopic Boom Cylinders
Fork Tilt Cylinders
Steering Cylinders
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Oil Sample Analysis
transmission
date of analysis
Jul 13, 2012
Silver
N/A
Water
0
Aluminum
8 PPM
Chromium
0 PPM
Nickel
0 PPM
Copper
27 PPM
Iron
30 PPM
Silicon
0 PPM
Glycol
0
Tin
0 PPM
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
No
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 19.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,000 to $31,800
3.85% of the final selling price (min $500)
Above $31,800
$1,225
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
