Open Operator Station, Komatsu 4D88E1FD Diesel Engine, Auxiliary Hydraulic Plumbing, Manual Coupler, General Purpose Bucket, 10-16.5 Tires, No CE certificate available from seller - CE mark on machine
Meter Reading:
2,754 Hours
Serial Number:
Location:
Mazowieckie, Poland
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
No CE certificate available from seller - CE mark on machine
Paint
Scratches; Chips; Paint overspray
Sheet Metal (Fiberglass) Condition
Dents; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
CE Certificate Available
Control Station
Glass
See photos for condition
Seats/Armrests
Seat Belts
Not equipped
Safety Control Lockout
Operational
Hydraulic Controls
Loose
Drivetrain Controls
Engine Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some damaged
Engine Warning Lights
Operational
Gauges
Some gauges inoperable
Hour Meter
2,754 Hours; Inoperable hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components operated except as noted.
Control Station #1
Engine
Fuel Type
Diesel
Emission Control Label
None found
Blow by @ idle (subjective observation)
Visible
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
See photos
Fuel Leaks
See photos
Cooling System Leaks
See photos
Limited Function Check
The engine started and ran. Fluid acculmulation on belly pans - Source unknown. See oil report.
Engine #1
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Drive Motors
Noisy;
Limited Function Check
The drivetrain was operational except as noted.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Noisy
Valves
Hydraulic Tank
Low oil level
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Seepage
Loader Lift Cylinders
Minor to moderate pin and bushing movement
Bucket Tilt Cylinders
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load. See oil report.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Frame Condition
Weld repair
Belly pans
Tire Brands
BKT
Tire Condition
See photos
Wheel Condition
Bent; Rusty
Wheel Studs
Lift Arm Condition
Chassis to Arm Pins
Minor to moderate movement
Quick Coupler to Arms Pins
Minor to moderate movement; Weld repair
Limited Function Check
The main components were operational with movement as indicated.
Chassis #1
Specialty
Quick Coupler
Release handle is broken; cracks in coupler frame
Loader Bucket Condition
GP Bucket
Speciality 1
Oil Sample Analysis
Engine
Hydraulic
date of analysis
Jul 13, 2012
Jul 13, 2012
Silicon
16 PPM
4 PPM
Lead
0 PPM
1 PPM
Tin
0 PPM
0 PPM
Copper
1 PPM
5 PPM
Aluminum
10 PPM
0 PPM
Silver
N/A PPM
N/A PPM
Nickel
0 PPM
0 PPM
Chromium
8.9 PPM
0 PPM
Iron
92 PPM
26 PPM
Glycol
N/A
N/A
Water
N/A
NEG
Fuel
N/A
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8am to 4pm
Forks subject to Max Load; Please call at least 24hrs in advance of Pick up
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before November 5.
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
€1 to €3,000
10% of the final selling price
€3,000 to €32,500
3% of the final selling price (min €300)
Above €32,500
€975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get pre-approved in advance of the auction. Here is a company we recommend who specialize in equipment financing:
Cat Financial
Financing for the way you work Your business is always changing, and so are your financial needs. You need quality equipment to get your work done and financing solutions that make sense for you. Count on a company that understands the work you do.
Warranty by Premium 2000
