Not original paint; Scratches; Chips; See photos for condition
Sheet Metal (Fiberglass) Condition
Dents; Bent panels; See photos for condition
Steps/Ladders
No visible damage
Hand Rails
No visible damage
General Appearance #1
Control Station
Mirrors
Damaged mounting bracket
Glass
Seats/Armrests
Burn holes; Damaged cushion; See photos for condition
Seat Belts
Operational
Horn
Operational
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational
Some inoperable
Engine Warning Lights
Operational; Transmission light flashes while shifting.
Travel Alarm
Operational
Gauges
Operational
Hour Meter Reading
5,577 Hours; Operational hour meter
Air Conditioner
Inoperable
Heater
Inoperable; Controls inoperable
Limited Function Check
The main components operated except as noted. Door latch missing.
Hour Meter Reading
Engine
Emission Control Label
None found
Blow by @ idle (subjective observation)
Minimal
Starter
Operational
Turbo or Blower
Operational; Exhaust connection leak
Fuel System
Operational
Exhaust System
No visible damage
Radiator
Oil Leaks
There is fluid accumulation on the oil pan.
Fuel Leaks
There is fluid accumulation on the injector pump.
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran with smoke that mostly cleared. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type
6 Speed; Powershift
Transmission
Operational; Dripping leak
Front Axle Assembly
Limited Function Check - Scraper
The drivetrain was operational except as noted.See oil report.
Limited Function Check
See oil report.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses
Braid Exposure; Broken hose clamps.
Steering Cylinders
Minor to moderate pin and bushing movement
Bowl Lift Cylinders
Seepage on the left cylinder; Minor to moderate pin and bushing movement
Ejector Cylinder
Fluid accumulation
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Hitch Condition
Worn
Hitch Pin Condition
Minor to moderate movement
Draft Arm Condition
Bowl Condition
Minor to moderate wear; Cracks; Dents
Floor Rollers / Guides
Minor to moderate wear; Brackets worn
Ejector Face Condition
Minor to moderate wear
Push Block
Minor to moderate wear
Cutting Edges
Reversible - turned
Elevator Chain Condition
Minor to moderate wear
Elevator Sprocket Condition
Minor to moderate wear
Elevator Flight Condition
Minor to moderate wear
Steering Linkage
Minor to moderate movement
Frame Condition
Cracked at right side transmission mount.
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Brake Control
Brake Lines/Hoses
Park Brake
Held on slope
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Condition
Cuts; Gouges; Radial; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Oil Sample Analysis
Engine
Transmission
date of analysis
Jul 20, 2012
Jul 20, 2012
Silicon
5 PPM
8 PPM
Lead
1 PPM
146 PPM
Tin
0 PPM
1 PPM
Copper
2 PPM
306 PPM
Aluminum
1 PPM
2 PPM
Silver
0.1 PPM
0.2 PPM
Nickel
0.8 PPM
0 PPM
Chromium
0.4 PPM
0.1 PPM
Iron
20 PPM
20 PPM
Glycol
NEG
N/A
Water
NEG
NEG
Fuel
>5%
N/A
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 8:00 am - 4:00 pm Mon-Fri
Call Jim Bim
Office 641-522-9206
Mobile 319-350-5331
Loading Dock Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before August 7.
This item is subject to Iowa sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
