Minor dents/scratches; Surface rust; Metal erosion; See photos for condition
Steps/Ladders
See photos for condition
Hand Rails
See photos for condition
General Appearance #1
Control Station
Mirrors
Glass
The cab door and the cab glass is missing.
Seats/Armrests
Torn cover
Seat Belts
Inoperable
Horn
Missing
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises. The gauge registers in the operating range.
Exterior Lights Operational
Some inoperable
Engine Warning Lights
Operational
Travel Alarm
Inoperable
Gauges
Difficult to read; The transmission temperature and fuel gauges are inoperable.
Hour Meter Reading
8,098 Hours; Operational hour meter
Air Conditioner
Inoperable
Heater
Operational; The temperature control knob is missing.
Limited Function Check
The main components operated except as noted.
Hour Meter Reading
Engine
Emission Control Label
None found
Blow by @ idle (subjective observation)
Significant
Starter
Operational
Turbo or Blower
Operational
Fuel System
Operational
Exhaust System
Rust penetration; There is an exhaust leak at the top of the muffler.
Radiator
Minor plugging of fins
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran with smoke that mostly cleared. See oil report.
Blow by @ idle (subjective observation)
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type
6 Speed; Powershift
Transmission
Front Axle Assembly
Fluid accumulation
Final Drives
Limited Function Check - Scraper
The drivetrain was operational without a load.
Drivetrain #1
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses
Worn
Steering Cylinders
Minor to moderate pin and bushing movement
Bowl Lift Cylinders
Dripping leak on the left cylinder; Minor to moderate pin and bushing movement
Ejector Cylinder
Minor to moderate pin and bushing movement
Limited Function Check
The hydraulic system was operational without a load.
Hydraulics #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Hitch Condition
Hitch Pin Condition
Minor to moderate movement
Draft Arm Condition
Draft Arm Trunnions
Minor to moderate movement
Bowl Condition
Floor Rollers / Guides
Heavy wear
Ejector Face Condition
Minor to moderate wear
Push Block
Cutting Edges
Heavy wear
Elevator Chain Condition
Minor to moderate wear; The elevator chain will not go in reverse. Seller Comment: The reverse function has been disconnected due to the elevator chain comming off while in reverse.
Elevator Sprocket Condition
Minor to moderate wear
Elevator Flight Condition
Minor to moderate wear; Some of the flights have bent edges.
Frame Condition
Limited Function Check
The main components were operational except as noted.
Master Cylinder
Soft pedal
Brake Control
Soft pedal
Brake Lines/Hoses
Cracked/chafed
Park Brake
Limited Function Check
The brake system functioned, stopping and holding the machine.
Tire Condition
Cuts; Gouges; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Aug 13, 2012
Silicon
7 PPM
Lead
0 PPM
Tin
0 PPM
Copper
1 PPM
Aluminum
1 PPM
Silver
0 PPM
Nickel
0.3 PPM
Chromium
0.3 PPM
Iron
3 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 5:00 am - 3:00 pm Mon-Fri
Call 24 hours prior to schedule pickup
No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps.
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before September 11.
This item may be subject to sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
