Home Page / Construction / Caterpillar 140G Motor Grader
 

Caterpillar 140G Motor Grader (#397658)

Search for other Motor Graders items

Winning Bid: US $76,000  
# of Bids: 40   View Bid History
Sold on: : 7/19/12
Auction Type: Featured Auction
SOLD!
Features: Enclosed Cab, A/C, Heater, Enclosed Cab, Caterpillar 3306 Engine, 17.5R25 Tires, Ripper, 14' Blade, Balderson BLQ-12 Front Mount. *** See link below for seller supplied maintenance record ***
Meter Reading: 13,127 Hours
Serial Number:
Location: South Dakota, United States
Zip/Postal Code:57730
(Custer County)
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Mark (on or near data plate) No
Paint Scratches; Chips; Weathered; Worn; See photos for condition
Sheet Metal (Fiberglass) Condition Minor dents; Scratches; Surface rust in areas; See photos for condition
Steps/Ladders Worn; Weathered; See photos for condition
Hand Rails Worn; See photos for condition
General Appearance #1
 
Control Station
Mirrors
Glass
Seats/Armrests
Seat Belts Operational
Horn Operational
Control Lock Lever
Hydraulic Controls
Steering Controls
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes; Some inoperable
Engine Warning Lights Operational
Travel Alarm Operational
Gauges Operational
Hour Meter/Odometer 13,127 Hours; Operational hour meter - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Air Conditioner Operational
Heater Operational
Limited Function Check The main components are in place and operational. The strobe light on top of the control station was removed from the unit after the inspection was performed.
Hour Meter/Odometer
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Minor
Starter Operational
Turbo or Blower Operational
Fuel System Operational
Exhaust System No visible damage
Radiator
Oil Leaks Fluid accumulation: Side of engine; Fuel pump governor; See photos
Fuel Leaks None seen
Cooling System Leaks None seen
Limited Function Check The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) Powershift; 6 speeds
Transmission Operational
Rear Tandems (Chain Drives)
Final Drives
Limited Function Check The drivetrain was operational. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics) Hoses at front of machine/Hoses at rear of machine; Worn; Braid exposure
Hydraulic Motors
Steering Cylinders Minor to moderate pin and bushing movement
Articulation Cylinders Minor to moderate pin and bushing movement
Wheel Lean Cylinders Minor to moderate pin and bushing movement
Blade Lift Cylinders Minor to moderate pin and bushing movement
Blade Angle Cylinders Minor to moderate pin and bushing movement
Blade Side Shift Cylinders Heavy pin and bushing movement
Saddle Positioning Cylinder Seepage
Saddle Lock Pin Operational
Limited Function Check The hydraulic system was operational without a load.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle) Bushings; Visible wear; See photos
Y-frame
Y-frame Pivot Trunnion Shims remaining
Circle Frame and Brackets
Circle Wear Strips Moderate wear
Circle Support Brackets
Circle Gear Box Minor wear
Circle Gear Visible slack; Worn pinion
Mold Board Slide Wear Strips Wear consistent with hours and age
Articulating Center Pins Wear Minor to moderate movement
Front Axle Oscillating Pin Wear Minor to moderate movement
Steering Linkage Minor to moderate movement
Wheel Tilt Linkage Visible wear
Limited Function Check (grader) The main chassis components were operational in a limited check.
Brake Type (Motorgrader) Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition Surface rust
Tire Brands Bridgestone
Tire Condition Minor cuts and gouges; See photos
Wheel Condition
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition 14' Blade
Blade Cutting Edge Condition (MG)
Ripper Condition
Front Lift Group Balderson BLQ-12; Pivot pin wear
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Jul 06, 2012 Jul 06, 2012
Silicon 4 PPM 3 PPM
Lead 0 PPM 2 PPM
Tin 0 PPM 0 PPM
Copper 2 PPM 77 PPM
Aluminum 2 PPM 7 PPM
Silver 0.1 PPM 0.5 PPM
Nickel 0.6 PPM 0 PPM
Chromium 2.2 PPM 0.3 PPM
Iron 10 PPM 32 PPM
Glycol NEG N/A
Water NEG NEG
Fuel <5% N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.