Previous Next
ITEM DETAILS
Meter Reading
155 Hours
Serial #
12' blade, EROPS, heater, JD 6414T eng, 8spd powershift trans

Inspection Report



Please note that as the buyer, you are responsible for reviewing the entire inspection report when evaluating an item.
Summary Protected by IronClad Assurance Protected by IronClad Assurance®
This grader appears to be in poor to fair overall condition for the age. The actual hours are unknown. Cosmetically there is some rust with unmatched and worn paint. Mechanically the engine and powertrain seem to be functioning properly with multiple leaks. The hydraulic system has leaks and is not completely functional. See the report for further details.


General Appearance
Description Rating Details  
operators manual No
cab/operator station Very dirty with oil leaking from the valves under the dash onto the floor board. Click here to open photos and videos of this item.  
sheet metal (fiberglass) condition Rust in places where the paint has worn off. Both traction weights have been removed. Click here to open photos and videos of this item.  
paint Worn, scratched and faded. There are several areas that have been spot painted with paint that does not match. Click here to open photos and videos of this item.  
(3)


Engine
Description Rating Details  
hour meter 155 hours, showing on the meter. Actual hours are unknown.
make & model Deere 6414T Click here to open photos and videos of this item.  
serial # The last 4 digits are 9298.
emission control label Exempt
fuel type Diesel
starter There is a clunking noise when the starter is engaged. It is difficult to determine the exact source of the noise.
battery
turbocharger
exhaust system
head gasket No visible leaks
oil dipstick tube & bonnet
blowby (checked at idle) Minor
valve cover gasket There is an oil leak at the front of the engine, the exact source or sources could not be determined without cleaning the engine.
oil pan & gasket Appears to be in good condition. It is difficult to tell exactly with the oil on the front of the engine.
injector pump
fuel line & injector leaks Minor dampness around the manual lift pump area.
water pump
radiator Dirty with some oil from the leak at the front of the engine.
limited function check Started and ran well with some oil leakage. There is a major oil leak between the engine and the torque converter. The wiring in the engine compartment is in bad shape. The engine oil was below the add mark. Click here to open photos and videos of this item.  
(2)


Powertrain
Description Rating Details  
transmission type Powershift - 8 speeds
torque converter There is a moderate to excessive oil leak at the junction between the engine and torque converter. The transmission did respond well. Click here to open photos and videos of this item.  
clutch NA - Inching clutch
transmission disconnect Yes
differential
differential lock Yes
rear tandems (chain drives) No visible leaks
limited function check The powertrain responded well with a moderate to excessive oil leak from between the engine and the torque converter. The exact source could not be determined. Click here to open photos and videos of this item.  
(2)


Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Description Rating Details  
blade tilt frame (saddle) Appears to be in good overall condition with normal wear for the age.
Y- frame Click here to open photos and videos of this item.  
Y-frame pivot trunnion Moderate wear. Click here to open photos and videos of this item.  
circle frame Click here to open photos and videos of this item.  
circle wear strips Seemed to have moderate wear.
circle support brackets
circle gear box Normal wear
moldboard slide wear strips Moderate wear Click here to open photos and videos of this item.  
articulating-center pins There is a considerable amount of movement that can be felt in the chassis when the disconnect pedal is released. Without an operator it was not possible to determine the exact source of the play. Click here to open photos and videos of this item.  
belly pans NA
front steering linkage Moderate wear in the linkage. Click here to open photos and videos of this item.  
front axle oscillating pin Minor play.
steering wheel play Approximately 3" of play at the wheel.
limited function check The condition of all the wear points could not be properly checked due to the limited movement in the circle and the moldboard. What could be checked seemed to have moderate overall wear.
brake type Hydraulic
master cylinder
brake lines/ hoses
park brake
limited function check Stopped the machine easily at low speeds.
tire brand name LF- Firestone, the rest are Michelin. Click here to open photos and videos of this item.  
tire size 14.00 - 24 Click here to open photos and videos of this item.  
tire condition LF- 0/32", RF- 4/32", LM- 8/32", RM- 4/32", LR- 4/32", RR- 4/32". Click here to open photos and videos of this item.  
wheel condition Click here to open photos and videos of this item.  
wheel studs, nuts, or bolts
(10)


Hydraulics
Description Rating Details  
pumps
valves The control valves in the operators station are leaking into the floorboard and under the cab. Click here to open photos and videos of this item.  
hoses Most appear to be in good condition with minor seepage from some fittings.
cylinders No visible leaks. The side-shift function on the moldboard was not functioning properly. The reason could not be determined during the limited check.
cylinder pins and bushings Moderate wear throughout.
motors The control for the circle was very stiff and did not want to move.
limited function check The components that could be checked functioned as expected for the age of the machine. The controls for the moldboard side-shift and the circle rotation were very stiff and would not function properly. The hydraulic oil was low at the time of the inspection.
(1)


Operator Station
Description Rating Details  
steps/ladders Some of the steps are bent.
hand rails
mirrors
glass
seats/armrests The bottom cushion fabric is torn. Click here to open photos and videos of this item.  
seat belts
exterior lights Some of the after-market lights are working, none of the originals appear to work. Click here to open photos and videos of this item.  
horn INOPERABLE
engine warning lights/alarms NA
back up alarm INOPERABLE
oil pressure Normal - 25 PSI at high idle.
gauges
hour meter operational? No - The hour meter appears to have been replaced recently.
air conditioner NA
heater Was not checked.
hydraulic controls The controls for the moldboard side-shift and the circle rotation were not working properly. The rest of the controls seemed to be in good condition. Click here to open photos and videos of this item.  
steering controls
powertrain controls
roll over certification label Yes
limited function check There is moderate wear in the controls and some leaks from under the dash.
(3)


Specialty Equipment
Description Rating Details  
blade condition 12' wide with normal wear. Click here to open photos and videos of this item.  
cutting edge condition Non-reversible edge appears to be in good condition.
(1)
 
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment's major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.