Back to Search Results / 1991 Caterpillar 14G Motor Grader
 

1991 Caterpillar 14G Motor Grader (#395717)

Search for other Motor Graders items

Winning Bid: €68,000  
# of Bids: 75   View Bid History
Sold on: : 7/25/12
Auction Type: Featured Auction
SOLD!
Features: Enclosed Cab, Heater, Caterpillar Diesel Engine, Hydrostatic Transmission, 4280mm Blade 3 Leg Ripper, 20.5-R25 Tyres. CE certificate available from seller - No CE mark on machine.
Meter Reading: 27,640 Hours
Serial Number:
Location: Rhone-Alpes, France
Shipping: See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report : Protected by IronClad Assurancenotes
Payment: Payment due within 3 business days after auction. See Details
Inspection Report Payment Shipping Financing  
Inspection Ratings Key
Limited use or recently replaced, free of visible wear or defects
Performs within the tolerances expected for age and type of item
Although performing, shows indication of needing repair or replacement
Needs immediate repair/replacement. Requires work if it is to perform
as expected
 
General Appearance
CE Certificate Available CE certificate available from seller - No CE mark on machine.
Paint Scratches; Chips
Sheet Metal (Fiberglass) Condition Minor dents/scratches
Steps/Ladders See photos for condition
Hand Rails See photos for condition
General Appearance #1
 
Control Station
Mirrors The left rubber around is too short.
Glass
Seats/Armrests
Seat Belts Operational
Horn Inoperable
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure The fault indicator shuts off after the engine oil pressure rises.
Exterior Lights Operational Yes; Some damaged
Warning Lights Operational
Travel Alarm Operational
Hour Meter/Odometer 27,640 Hours - IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater Operational
Limited Function Check (cs) The main components are in place and operational.
Hour Meter/Odometer (Start)
 
Engine
Emission Control Label None found
Blow by @ idle (subjective observation) Visible; Recirculating system
Starter Operational
Turbo or Blower Operational
Fuel System Operational; There is residue on Injector Pump; Residue on Fuel Filter.
Exhaust System Rust penetration
Radiator
Oil Leaks See photos; There is oil at engine drain plug and on the belly plate of the machine. There is oil on the engine.
Fuel Leaks Seepage: Fuel filter; Fluid Accumulation: Injection pump
Cooling System Leaks None seen
Limited Function Check (Engine) The engine started and ran. See oil report.
Emission Control Label
 
Drivetrain
Operational test is limited to low speed in a confined flat area without load. Differential interlocks, full transmission shifting and functionality of all drive axles cannot be fully verified. Inspector listens for abnormal noises, observes leaks and notes physical damage.
Transmission Type (Motorgrader) Powershift; 8 speeds
Transmission Fluid accumulation; Unable to visually check duue to cover
Rear Drive Axle
Rear Tandems (Chain Drives) Play under braking
Final Drives
Limited Function Check The drivetrain was operational. See oil report.
Drivetrain #1
 
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank Low oil level
Steering Cylinders Seepage - Leaks on Hose.
Articulation Cylinders Minor to moderate pin and bushing movement
Wheel Lean Cylinders Heavy pin and bushing movement
Blade Lift Cylinders Heavy pin and bushing movement
Blade Angle Cylinders Moderate to Heavy.
Blade Side Shift Cylinders Moderate
Limited Function Check Residue on the Ripper Cylinder.
Hydraulics #1
 
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Blade Tilt Frame (saddle)
Y-frame
Y-frame Pivot Trunnion Moderate Movement.
Circle Gear Box Some slack
Circle Gear Visible slack
Mold Board Slide Wear Strips Moderate wear
Articulating Center Pins Wear Minor to moderate movement
Front Axle Oscillating Pin Wear Moderate to Heavy
Steering Linkage Moderate to Heavy - weld Repair on King Pins.
Wheel Tilt Linkage Heavy wear
Belly pans
Limited Function Check (grader) The main chassis components were operational in a limited check.
Brake Type (Motorgrader) Air
Master Cylinder/Brake Control
Park Brake
Limited Function Check The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands Left Front: Goodyear ; Right Front: Goodyear ; Right Middle: Bridgestone ; Right Rear: Bridgestone ; Left Rear: Michelin ; Left Middle: Bridgestone
Tire Condition Cuts; Gouges
Wheel Condition Minor Dents
Wheel Studs, Nuts, Lugs
Chassis #1
 
Specialty
Blade Condition 4280mm blade
Blade Cutting Edge Condition (MG)
Ripper Condition 3 Ripper Legs
Specialty #1
Oil Sample Analysis Engine Transmission
date of analysis Jul 13, 2012 Jul 13, 2012
Silicon 12 PPM 9 PPM
Lead 1 PPM 6 PPM
Tin 0 PPM 1 PPM
Copper 9 PPM 108 PPM
Aluminum 2 PPM 8 PPM
Silver N/A N/A
Nickel 0 PPM 0 PPM
Chromium 0.6 PPM 0.1 PPM
Iron 34 PPM 28 PPM
Glycol N/A N/A
Water N/A NEG
Fuel N/A N/A

Disputes: This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Warranty by Premium 2000

Place holder (To be provided by P2000)

TO DO: Window size adjustments based on actual data

Engine Coverage.  some text.

Transmission Coverage.  blah blah.

Affordable plans.

Learn more!
Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, TruckPlanet℠, IronClad Assurance® and Auctions you can trust® are service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.