20kW, 25 KVA, 240/480 Volts, 3 Phase, Isuzu AA-4LE2 Engine, Electrical Switch Gear, Bottom Mounted Fuel Tank, Tandem Axle Trailer Chassis, Surge Brakes, Interchangeable Hitch (no hitch included), ST225/75D15 Tires. The pintle ring hitch seen in the photos will not be included at time of sale. ***Items must be picked up prior to June 28th or Buyer will be responsible for a removal fee and storage fees. ***The state of Oregon does not require a title for this item. A Bill of Sale will be provided upon request.***
Meter Reading:
3,429 Hours
Serial Number:
Location:
Oregon, United States
Zip/Postal Code:97343
(Lincoln County)
Shipping:
See shipping details for important pickup requirements and to get a shipping estimate
Inspection Report :
Protected by IronClad Assurance
Payment:
Payment due within 3 business days after auction. See Details
Scrapes; Surface rust in areas; See photos for condition
Cowling, Insulation and Belly Pans
General Appearance #1
Control Station
Gauges
Operational
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises; The gauge registers in the operating range; 60 PSI
Engine Warning Lights
Operational
Hour Meter Reading
3,429 Hours; Functional hour meter
- IronPlanet makes no guarantees as to actual hours/miles; we can only report what can be visually observed.
Limited Function Check
The main components are in place and operational.
Hour Meter Reading
Engine
Make and Model
Isuzu AA-4LE2 Engine
Fuel Type
Diesel
Blow by @ idle (subjective observation)
Minor
Emission Control Label
US EPA certification label
Starter
Operational
Fuel System
Operational
Exhaust System
No visible damage; See photos for condition
Radiator
Oil Leaks
None seen
Fuel Leaks
None seen
Cooling System Leaks
None seen
Limited Function Check
The engine started and ran. See oil report.
Blow by @ idle (subjective observation)
Generator
The generator was not load checked during the inspection. IronPlanet does not guarantee the generators ability to run at its full rated kW output.
Generator Make and Model
Denyo DF-02712 generator
Operating Voltage
240/480
Disconnect Switch
Not operationally checked
Cables and Connections
Emergency Shut Off Switch
None found
Receptacles
Limited Function Check
The power unit responded well with no unusual noises. The generator could not be checked for electrical output but functioned when checked without a load.
Generator #1
Chassis
IronPlanet pin connection pivot point wear inspections are limited to sound, sight and feel observations. Dial indicator testing is not performed.
Interchangeable hitch; Pintle ring hitch was not on unit for inspection and was only installed to move the unit for inspection; Pintle ring hitch not included
Lights/Wiring Condition
Not operationally checked
Marker Lights Functional
Not operationally checked
Brake Lights Functional
Not operationally checked
Turn Signals Functional
Not operationally checked
Frame Rails/ Main Beams Condition
One crossmember is slightly bent
Landing Gear / Tongue Jack
Overall Length and Width
15' 7" Long x 74" Wide
Fuel Tank Condition
Chassis #1
Oil Sample Analysis
Engine
date of analysis
Jun 13, 2012
Silicon
1 PPM
Lead
1 PPM
Tin
0 PPM
Copper
0 PPM
Aluminum
0 PPM
Silver
0.1 PPM
Nickel
1.4 PPM
Chromium
0 PPM
Iron
2 PPM
Glycol
NEG
Water
NEG
Fuel
<5%
Disputes:
This item is offered with IronClad Assurance® protection. With IronClad Assurance®, if a buyer discovers that the item is not substantially in the condition as represented in this inspection report, the buyer may submit a written dispute claim to IronPlanet. Following submission of a written dispute claim, IronPlanet will investigate the claim, re-inspecting the equipment item as necessary, and determine a fair and mutually beneficial resolution. Please note that IronPlanet inspections are performed solely for the purpose of reporting the visible condition of the equipment''s major systems and attachments on the day of the inspection and do not include load testing or digging/lifting. These inspections are not designed nor intended to detect latent defects, or conditions that could only be found in connection with the physical dismantling of the equipment or the use of diagnostic tools or techniques. This inspection report includes ratings, comments, and photos of the various components of the item. Knowledgeable buyers are expected to carefully review all of the available information in the inspection report, including all photographs, in order to make the best bidding and buying decision possible.
Buyer is responsible for all costs related to transporting the item.
Item must be picked up within 8 business days of the auction, or the buyer will incur storage charges.
The location information will be provided once full payment has been received.
The buyer will have the option during Checkout to automatically receive competing quotes.
Pickup Terms Failure to follow these terms may result in the seller turning away the attempt to pick up the purchased item.
Hours: 9am to 2pm, Mon-Fri
You must call at least 24 hours in advance to schedule pickup
Loading Dock NOT Available
Ramps NOT Available
Forklift Available
Driver MUST bring a copy of the IronPlanet Transportation Release to pick the item up.
Within 3 business days after the auction, the buyer must submit full payment, including applicable taxes and fees.
For this item, payment is due on or before June 26.
This item may be subject to sales tax. (Read more)
Buyer must pay a transaction fee, based on the final selling price:
Final Selling Price
Transaction Fee
$1 to $5,000
10% of the final selling price
$5,001 to $32,500
3% of the final selling price (min $500)
Above $32,500
$975
Payment can be made by wire transfer (recommended), certified bank check (U.S. customers only), or credit card (when full payment amount is $5,000 or less).
All bids are binding and cannot be retracted. Failure to make full payment will result in a Default Fee.
If you are looking to finance your purchase, we recommend you get
pre-approved in advance of the auction. Here are three companies we recommend
who specialize in equipment financing:
GE Capital
Thank you for your interest in applying for a GE Capital loan. GE Capital
provides equipment leasing, financing and other services to deliver significant
benefits for your business. Our products and services are customized with
flexible structure and payment terms to match your unique needs and goals. In
order to start the process of applying for a loan, please complete the attached
credit
application and email it to Ron Hayes or fax it to 1+866-401-5114.
Cat Financial - Capital Solutions
Get a Pre-Approved Line of Credit Be prepared for
upcoming auctions by arranging a line of credit from Cat Financial. Time is
money during an auction, and seconds count. Let Cat Financial provide you with
the pre-arranged purchasing power that lets you focus on the equipment you need.
Apply today.
Trucks
If you wish to finance your truck purchase, we recommend that you get pre-approved before the auction.
DriveItNow provides pre-qualification for IronPlanet trucks. Through DriveItNow, you can securely pre-qualify for financing online without providing confidential information such as your social security number or date of birth. There is also NO impact on your credit score. Click on the monthly payment or “Get Financing” link from any live auction truck listing to get started. DriveItNow is a service provided by ACS (Automobile Consumer Services, Inc.)
Warranty by Premium 2000
